|
||
|
17th January 2022, 11:49 | #1 |
Avid contributor
Rover 75 and 75 Tourer Join Date: Aug 2015
Location: Dolphinton
Posts: 156
Thanks: 11
Thanked 154 Times in 47 Posts
|
Launch Car Rear Suspension Help
Last year one of the rear springs broke on my launch car. Two replacements were purchased from Discount MG Rover Spares but when it came to fitting we discovered that one of the lower arms was so badly corroded that it was starting to bend and one of the trailing arms was also in a bad way.
To cut a long story short took the plunge and replaced everything. Rear subframe, upper and lower arms, trailing arms, bushes, anti roll bar, rear dampers. Also ended up replacing the front dampers. DMGRS were great for the parts. I’ve owned the car for six years and believe very strongly in doing all I can to keep her on the road. She’s almost twenty three and been used so hopefully these repairs will outlast me!! My question is about trim height. I’ve seen Rover Group technical advice that from hub centre to wheel arch (unladen) its Front 408.5 + or - 10mm Rear 399 + or - 10mm The front on mine is bang on 410mm however the rear is 370mm on the near side and 365mm on the off side. Trying to find out what we’ve done wrong or how to raise the rear by 20mm to get within the tolerances. I did read that if replacement springs or shock absorbers are fitted then these may affect the factory figures. Sorry for the length of this but any knowledge on the matter would be really appreciated. Sent from my iPhone using Tapatalk |
17th January 2022, 17:42 | #2 |
Posted a thing or two
Rover 75 saloon, manual. Rover 75 Tourer, Auto. Join Date: Jan 2013
Location: Newry
Posts: 1,781
Thanks: 574
Thanked 443 Times in 371 Posts
|
AFAIK it’s the springs that set the ride height. It would appear that the springs are the only items you didn’t replace at the rear!🤭
Sent from my iPhone using Tapatalk
__________________
2006 75 Contemporary SE diesel manual (#1) 2003 75T Connoisseur SE diesel auto (For Comfort) 2005 75 Connoisseur SE diesel auto (Marmite duotone ) 2006 75 Connoisseur SE diesel auto (The last one?) 2009 E220 (For a change) 2018 L200 (For Big & Heavy Things) 1976 W114 250 Manual (For Sundays) |
17th January 2022, 18:06 | #3 |
Avid contributor
Rover 75 and 75 Tourer Join Date: Aug 2015
Location: Dolphinton
Posts: 156
Thanks: 11
Thanked 154 Times in 47 Posts
|
They were replaced as well as the originals were broken which was the start of the whole process.
Sent from my iPhone using Tapatalk |
17th January 2022, 18:45 | #4 |
This is my second home
MG ZT and Rover 75, Join Date: Jul 2013
Location: Wigan
Posts: 3,276
Thanks: 2,556
Thanked 2,685 Times in 1,037 Posts
|
It sounds like...
|
17th January 2022, 19:59 | #5 | |
Posted a thing or two
Rover 75 saloon, manual. Rover 75 Tourer, Auto. Join Date: Jan 2013
Location: Newry
Posts: 1,781
Thanks: 574
Thanked 443 Times in 371 Posts
|
Quote:
What did you replace them with? Sent from my iPhone using Tapatalk
__________________
2006 75 Contemporary SE diesel manual (#1) 2003 75T Connoisseur SE diesel auto (For Comfort) 2005 75 Connoisseur SE diesel auto (Marmite duotone ) 2006 75 Connoisseur SE diesel auto (The last one?) 2009 E220 (For a change) 2018 L200 (For Big & Heavy Things) 1976 W114 250 Manual (For Sundays) |
|
17th January 2022, 20:08 | #6 |
Avid contributor
Rover 75 and 75 Tourer Join Date: Aug 2015
Location: Dolphinton
Posts: 156
Thanks: 11
Thanked 154 Times in 47 Posts
|
The rear springs were purchased from DMGRS listed as Rover 75 rear springs on their website.
Sent from my iPhone using Tapatalk |
18th January 2022, 07:24 | #7 |
This is my second home
Rover 75 CDT Manual Connoisseur SE, Rover 75 CDT Automatic Connoisseur SE & a Freelander Td4. Join Date: Jul 2009
Location: Hampshire
Posts: 11,550
Thanks: 3,470
Thanked 3,119 Times in 2,247 Posts
|
As mentioned the ride height can only be down to the springs.
|
18th January 2022, 11:46 | #8 |
This is my second home
MG ZT-T 190 Monogram Typhoon Join Date: Jan 2009
Location: Oxfordshire
Posts: 4,707
Thanks: 328
Thanked 557 Times in 443 Posts
|
Good to see another being kept on for long service.
I assume you fitted both upper and lower spring isolators? I'm sure I've seen two different thicknesses on the lower isolators. Perhaps this accounts for the descrepancy if the springs have been manufactured considering the thicker type and yours has the thinner type fitted? |
18th January 2022, 12:04 | #9 |
Avid contributor
Rover 75 and 75 Tourer Join Date: Aug 2015
Location: Dolphinton
Posts: 156
Thanks: 11
Thanked 154 Times in 47 Posts
|
I found a post from 2003 on a MG Rover site that says the spring specification is on a label under the near side of the rear seat.
Had a look and sure enough the label is there although a bit faded with age but I can just make it out. It’s stamped Spring and Damper Specification Model R40 Date 29/04/99 Time 1109 Formal ID 3012 MWL 08170033 The cars VIN number CL Codes Front RH PG Front LH JG RR Damper (left blank or completely faded) RR Spring RC I see Rimmer Bros sell rear springs with various codes including RC so maybe it’s a pair of RC’s I need. Sent from my iPhone using Tapatalk |
|
|