part numbers

25th November 2006, 19:43

anyone have the part numbers for the badges rover badges that fit on the rear door a windows and the badge on the boot lid on a raised plinth?
mine are very dull and milky in colour theres a lot on abay but want to buy the right ones!!!

cheers

Kandyman · 25th November 2006, 21:13

Hi 7t5

If you speak to Rimmers they can tell you the part numbers or wait till Mike and Co read this

Christopher · 25th November 2006, 21:18

Buying new ones should be relatively cheap - don't know exact part numbers I'm afraid .... however:

I bought a badge off ebay when I replaced the boot handle chrome and the badge turned up all washed out and worn as you describe.

All it took was A LOT of polishing with scratch-X (or T-cut) polish and slowly but surely the dullness went away and the badge is now like new - worth a try!

I also have this polishing gizmo that plugs into the accessory socket and takes some of the elobw grease out of it!!

HTH

Mike · 25th November 2006, 21:19

DAB101180 is the rear quarter part number as posted on .org

Tatts · 25th November 2006, 21:26

Gawd! That signature is gonne give me a siezure if I look at it any longer

25th November 2006, 19:43	#1
7t5 Guest Posts: n/a	part numbers anyone have the part numbers for the badges rover badges that fit on the rear door a windows and the badge on the boot lid on a raised plinth? mine are very dull and milky in colour theres a lot on abay but want to buy the right ones!!! cheers

25th November 2006, 21:18	#3
Christopher Owners Club Director Rover 75 V6 Copperleaf Red, MG ZTT 190+ Lagoon & Early MGF Join Date: Oct 2006 Location: Rugby Posts: 9,287 Thanks: 105 Thanked 343 Times in 81 Posts	Buying new ones should be relatively cheap - don't know exact part numbers I'm afraid .... however: I bought a badge off ebay when I replaced the boot handle chrome and the badge turned up all washed out and worn as you describe. All it took was A LOT of polishing with scratch-X (or T-cut) polish and slowly but surely the dullness went away and the badge is now like new - worth a try! I also have this polishing gizmo that plugs into the accessory socket and takes some of the elobw grease out of it!! HTH __________________ Christopher in banana veritas

25th November 2006, 21:19	#4
Mike This is my second home Rover 75 V8 Join Date: Oct 2006 Posts: 3,448 Thanks: 0 Thanked 206 Times in 32 Posts	DAB101180 is the rear quarter part number as posted on .org __________________ Mike [SIGPIC][/SIGPIC]

25th November 2006, 21:26	#5
Tatts This is my second home MG6 TL Join Date: Nov 2006 Location: Tarn Posts: 5,269 Thanks: 2 Thanked 46 Times in 37 Posts	Gawd! That signature is gonne give me a siezure if I look at it any longer __________________ http://www.wcgsig.com/115562.gif

25th November 2006, 21:13	#2
Kandyman Banned ROVER 75 2.5 V6 Connoisseur SE Limousine 2004 Join Date: Oct 2006 Location: Welling Posts: 10,995 Thanks: 0 Thanked 2 Times in 2 Posts	Hi 7t5 If you speak to Rimmers they can tell you the part numbers or wait till Mike and Co read this