|
||
|
15th April 2019, 09:13 | #9441 |
Avid contributor
Rover 75 Saloon Join Date: Aug 2013
Location: Ruislip
Posts: 107
Thanks: 2
Thanked 30 Times in 19 Posts
|
Well, yesterday actually.
Wire brush and paint all the scabby floor, fuel tank cage, antiroll bar and subframe washers. While paint dried, removed and replaced all six trailing arm toe bolts. They looked horrible (someone had obviously been there before with a 12 point socket and given up), but they all came out without too much fuss. Replace subframe, arms, springs and antiroll bar / droplinks. To do: Trailing arm toe bushes, torque everything up, replace exhaust, test drive.
__________________
Objects in the rearview mirror may be enormous and a very long way away. |
15th April 2019, 09:31 | #9442 |
This is my second home
Roverless + 1.7D Sportage Join Date: Aug 2014
Location: East Norfolk
Posts: 7,050
Thanks: 729
Thanked 2,021 Times in 1,449 Posts
|
New specs for a Triclops !
__________________
Oil in my veins! |
15th April 2019, 21:40 | #9443 |
Gets stuck in
Connoisseur SE 1.8 Auto Saloon Join Date: Jul 2015
Location: Kendal
Posts: 633
Thanks: 129
Thanked 176 Times in 147 Posts
|
Gingerly drove it to work and back for the first time since it overheated on Wednesday.
Max temp was 85C, more generally 79-82C so guess the thermostat is gone (whether cause or effect I don't know). Residual pressure in the header tank both overnight (at the weekend) and during the day (10hrs at work) is not a good sign, but it doesn't seem to be ejecting any coolant, even though its slightly overfilled, and sniff test was clear....hoping it's just an airlock or something easily fixed. Tomorrows job is to get a jubilee clip from B&Q (other DIY stores are available) to replace the broken spring clamp on the thermostat when I get round to replacing that. |
16th April 2019, 08:05 | #9444 |
Newbie
Rover 75 tourer Join Date: Oct 2018
Location: Kingswinford
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
|
In line thermostat
Bought and fitted an inline thermostat as it was running cold On the 1st outing it worked with 9 o'clock reading and a toasty interior but then over the week the temperature gradually returned to just off the the starter blocks, temporary elation.
|
16th April 2019, 08:21 | #9445 | |
Give to Learn
Freelander 2 Join Date: Aug 2010
Location: West Midlands
Posts: 18,717
Thanks: 1,155
Thanked 6,407 Times in 3,874 Posts
|
[QUOTE]
Quote:
Hi Paul. What make of inline stat did you fit? some have a jiggle pin which you do not want as they let water through slowly.
__________________
Arctic Givology Learn to Give Everything is Achievable ad altiora tendo. Check out our Nano meet dates http://www.midlandsnanomeets.co.uk/ http://www.the75andztclub.co.uk/index.php?thepage=howto " You do the work , we supply the expertise " |
|
16th April 2019, 13:57 | #9446 |
Avid contributor
Rover 75 Saloon Join Date: Aug 2013
Location: Ruislip
Posts: 107
Thanks: 2
Thanked 30 Times in 19 Posts
|
Finished. Phew.
Yesterday, replaced trailing arm bushes. I'd have said that they were all right, looking at them, but I know how much play there was with the suspension arms off Drilled and sawed out and pulled the new ones in with the tool for the smaller bushes and the handles of a couple of pairs of pliers as spacers. Cleaned and painted the mounting shoes. Found that Rimmer's had sent me a severely substandard bush bolt which stretched like a piece of rubber upon application of the torque wrench. Reused the best of the original bolts... Torqued up all the bolts on each side with a jack under the hub carrier to take the weight on that side and put everything in the right place. Replaced exhaust. Isn't it funny how the really sweary jobs sound simplest? Oops. Flat battery. Well, I'd been using the tail as a tool / parts store and as I can't open the thing without power... Also couldn't run the engine occasionally as the exhaust was sat in the shed. Jump start off the wife's car. You should have heard the revs drop on the little Daihatsu when its alternator found a flat Rover battery attached to it(!) Today: Four wheel align. (£££) No discount for it being the easiest set of toe bolts they've ever seen The effect on the car's ride is well into the "wow" category and worth all the effort.
__________________
Objects in the rearview mirror may be enormous and a very long way away. |
16th April 2019, 15:27 | #9447 | |
Gets stuck in
Connoisseur SE 1.8 Auto Saloon Join Date: Jul 2015
Location: Kendal
Posts: 633
Thanks: 129
Thanked 176 Times in 147 Posts
|
Quote:
Still concerned that I've not yet found any definitive reason for it to overheat, so I'll just have to assume it was the 'stat giving up and not opening. |
|
16th April 2019, 15:30 | #9448 |
Gets stuck in
MG ZT 190 SE Join Date: Oct 2017
Location: Chatham, Kent
Posts: 569
Thanks: 22
Thanked 163 Times in 135 Posts
|
Took the ZT for it's MOT, all passed OK - my fiddling with the number plate at least lasted until that. Surprising that I've only done just over 3000 miles since last year.
Going to set about modifying my spare handbrake compensator ready to fit when I get round to taking the carpet out. Couple of quid for the stainless shackle and easy enough job to do. |
16th April 2019, 17:30 | #9449 | |
Gets stuck in
Connoisseur SE 1.8 Auto Saloon Join Date: Jul 2015
Location: Kendal
Posts: 633
Thanks: 129
Thanked 176 Times in 147 Posts
|
Quote:
Spoke too soon, level had dropped to the max mark when I came back to the car tonight. Slightly more pressure there as well. Just hoping that is an airlock working its way out as it doesn't seem to be gurgling so much on startup any more... |
|
17th April 2019, 11:26 | #9450 |
This is my second home
Roverless + 1.7D Sportage Join Date: Aug 2014
Location: East Norfolk
Posts: 7,050
Thanks: 729
Thanked 2,021 Times in 1,449 Posts
|
Auto transmission fluid changed this morning. Thanks to all for info and "How to". Much appreciated. Smooth changes and all gears intact so I must have got it right! I put the front end up on my ramps and jacked up the back end until it was level, then popped the axle stands under for belt and braces. All easy to get to that way.
Had a check under the wing wiring loom for chafing and there is plenty of clearance. I'm going to get a bit of rubber heater hose and split it down one side to clip over the sharp edge which causes the problem. Don't know why it wasn't done like that from new. Mind you, it has lasted 20 years like that! Mike
__________________
Oil in my veins! |
|
|