pinchbolts - Page 2

xsport · 25th June 2021, 16:36

thanks andy. nice to hear that as i will use matts bolts and rimmer nuts. i have also coated the pinch holes all three with dynax s50 anti corrosion spray and the lower arm pins and through bolts . the lower arm pins also sit direct inside a cast iron bored hole. another corrosion point which does not not help during the splitting of the lower arm pin from the hub. as you say andy there will always be corrosion and you wont stop that even with marine 2 st/steel it happens. thanks for all replies.

TourerSteve · 25th June 2021, 19:19

Quote:

Originally Posted by xsport

there will always be corrosion and you wont stop that

No but the Copper grease and the Dynex S50 will certainly help !
Bolt shank well copper greased will aid removal even after a few years

25th June 2021, 16:36	#11
xsport Posted a thing or two rover 75 club se Join Date: Apr 2011 Location: Leicester Posts: 1,664 Thanks: 358 Thanked 419 Times in 310 Posts	thanks andy. nice to hear that as i will use matts bolts and rimmer nuts. i have also coated the pinch holes all three with dynax s50 anti corrosion spray and the lower arm pins and through bolts . the lower arm pins also sit direct inside a cast iron bored hole. another corrosion point which does not not help during the splitting of the lower arm pin from the hub. as you say andy there will always be corrosion and you wont stop that even with marine 2 st/steel it happens. thanks for all replies.