|
||
|
20th April 2021, 16:08 | #1 |
Avid contributor
Rover 75 classic se cdti\ mg zt 120 /rover 75 club 1.8 Join Date: Aug 2020
Location: Bolton
Posts: 166
Thanks: 85
Thanked 13 Times in 10 Posts
|
Clutch pedal sticking
My clutch pedal sometimes is sticking have just had full clutch change plus new master slave I have bleed the system manually with 500ml of fluid but still sticks sometimes I have decided to buy an easy bleed by gunstons to try and sort out this problem any Ideas
|
20th April 2021, 18:22 | #2 |
Regular poster
MGZT-T Join Date: Mar 2021
Location: Westerham
Posts: 61
Thanks: 11
Thanked 8 Times in 7 Posts
|
Does it stick down, up, or midway, or is it just jerky. If just jerky it is probably a mechanical problem in the pedal box. I had this on another type of car and changed the clutch, had the clutch changed under warranty. Two master cylinders and a slave. Really flummoxed me. It was binding in the pedal box itself. Bit of a nightmare job as the pedal box had to come out for a bit of welding. The stop that stops the pedal completely going to the floor had sheered off allowing the clutch operating rod into the master cylinder to travel too far down the bore.
Worth checking.
__________________
Simon ZT-T KV6 Auto (almost perfect) Alfa Romeo 156 Sportwagon (for sale, allergic to pot holes) Alfa Romeo S2 Spider (because I always fancied Mrs Robinson) Lancia Fulvia Sport Zagato 1.3S (very rare but a bit of a poser) VW Split screen camper (to feed my ageless hippy syndrome) 2000 Citroen Berlingo (no family should be without one) TR4a for 43 years (just sold, ran out of space) |
|
|