Go Back   The 75 and ZT Owners Club Forums > The 75 and ZT Owners Club Forums > I.C.E. Forum > Sat Nav Hardware & Software > Factory Fit Highline & Lowline Navigation Systems
Register FAQ Image Gallery Members List Calendar Mark Forums Read
Notices

Reply
 
Thread Tools Display Modes
Old 2nd May 2019, 15:22   #1
Adrian1961
Regular poster
 
Rover 75

Join Date: Dec 2013
Location: Gloucestersire
Posts: 48
Thanks: 25
Thanked 4 Times in 4 Posts
Default Hi Line Sat Nav Issue.

Hi everyone, I have a navigation problem.
I can enter an address into my navigation menu but when I select destination guide I see a map with the car being located in a different part of the country, the map display show’s no satellite in green or any starts, just the planet only. The vehicle ( Connie Hi Line Saloon 2001) is fitted with the Mk III unit which appears to be fine, I have checked for water damage, connections to the rear of the unit together with the small metal antenna plug all of which are fine, however, I can’t access the service mode via the “Set” & “Menu” sequence. I’m holding the menu button in with no result. No doubt the unit is in “Survive” mode with info being obtained via the Gyro, Wheel speed & direction sensors. Can anyone point me in the right direction as to how I may rectify the problem? Thanks.
Adrian1961 is offline   Reply With Quote
Old 3rd May 2019, 17:40   #2
Duotone
This is my second home
 
Duotone's Avatar
 
75

Join Date: Nov 2006
Location: Leeds
Posts: 8,432
Thanks: 176
Thanked 907 Times in 716 Posts
Default

Check this plug and socket located behind the headunit.

The grey/green wire in this plug is the signal wire that comes from the ABS

unit. If this wire or the sat nav antenna wire is not connected then the whole

system will be unable to recognise where it is.



Dave T
Duotone is offline   Reply With Quote
Old 8th May 2019, 17:50   #3
Adrian1961
Regular poster
 
Rover 75

Join Date: Dec 2013
Location: Gloucestersire
Posts: 48
Thanks: 25
Thanked 4 Times in 4 Posts
Default

[QUOTE=Duotone;2731374]Check this plug and socket located behind the headunit.

The grey/green wire in this plug is the signal wire that comes from the ABS

unit. If this wire or the sat nav antenna wire is not connected then the whole

system will be unable to recognise where it is.





Dave,]Thank you for the advice and suggestion, I'll check this out over the weekend and have a look behind the unit and let you know how I get on.
Adrian1961 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 13:10.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd