|
||
|
28th January 2008, 13:54 | #21 |
Regular poster
Rover 75 CDT Saloon Join Date: Nov 2006
Location: Maribor
Posts: 59
Thanks: 1
Thanked 0 Times in 0 Posts
|
I've fouhd sometnihg on ebay (Germay).
http://cgi.ebay.de/Webasto-Thermo-TO...QQcmdZViewItem This is a PCB, isn't it? But all the PCBs are not the sam as I understand. I will aks here in Slovenia at Webasto. They have already told me to come to test my FBH and then they see what could be done. |
28th January 2008, 16:03 | #22 |
This is my second home
ZT400 Join Date: Oct 2006
Location: Ellesmere
Posts: 5,948
Thanks: 0
Thanked 43 Times in 29 Posts
|
That PCB is not suitable, if you look carefully it does not have the pins in the connector for the water pump
Personally I am not going to bother with PCBs from Ebay I have bought two so far both allegedly brand new, both seem faulty. Net result for me this exercise is far to time consuming and is starting to make a hole in my pocket so I don't think I will continue with it. |
28th January 2008, 18:07 | #23 |
Avid contributor
MG ZT CDTi 135 XPower Grey Join Date: Nov 2006
Location: Chertsey, Surrey
Posts: 116
Thanks: 0
Thanked 0 Times in 0 Posts
|
Is it a common fault? Maybe an easy fix...
|
12th March 2008, 19:22 | #24 |
This is my second home
No longer in the MGR club Join Date: Nov 2006
Location: Tipperary
Posts: 3,933
Thanks: 35
Thanked 51 Times in 35 Posts
|
Keith
Do I need another interface for this in addition to the Ibus one?
__________________
'Tis better to be silent and be thought a fool, than to speak and remove all doubt. |
12th March 2008, 21:33 | #25 |
I really should get out more.......
260 SE vin 214 ( last mark 1 260 ) Join Date: Dec 2006
Location: Lancashire
Posts: 2,009
Thanks: 1
Thanked 8 Times in 4 Posts
|
given thenumber of duff webasto's knocking around with PCB issues it would be good if we could get some real technical info from them to enable us to fault find and sort the issues- the guys in the know at webast know there are issues but wont release data - as an electronics engineer Ifind it all very frustrating
__________________
[SIGPIC][/SIGPIC] |
12th March 2008, 21:55 | #26 |
This is my second home
No longer in the MGR club Join Date: Nov 2006
Location: Tipperary
Posts: 3,933
Thanks: 35
Thanked 51 Times in 35 Posts
|
Knowledge is power - and in this case money as you have to pay over £200 for a new PCB/heat exchanger assembly.
__________________
'Tis better to be silent and be thought a fool, than to speak and remove all doubt. |
12th March 2008, 21:56 | #27 |
This is my second home
ZT400 Join Date: Oct 2006
Location: Ellesmere
Posts: 5,948
Thanks: 0
Thanked 43 Times in 29 Posts
|
|
8th June 2009, 19:15 | #28 |
Retired
-- Join Date: Jan 2007
Location: --
Posts: 3,785
Thanks: 0
Thanked 4 Times in 4 Posts
|
Just come to this post having bought a Diesel.
I can guess why the Resler doesn't work off the car: pull up resistor to 12v. It's only present in one unit (BCU I think) so needs to be added if that's not in circuit. I guess the webasto one has this. If it will help, I'll try to find what value. |
10th June 2009, 19:52 | #29 |
I really should get out more.......
260 SE vin 214 ( last mark 1 260 ) Join Date: Dec 2006
Location: Lancashire
Posts: 2,009
Thanks: 1
Thanked 8 Times in 4 Posts
|
try a 4k7 for starters
__________________
[SIGPIC][/SIGPIC] |
11th June 2009, 20:12 | #30 |
Retired
-- Join Date: Jan 2007
Location: --
Posts: 3,785
Thanks: 0
Thanked 4 Times in 4 Posts
|
there's a few threads around, and some refer to the Wbus, which we don't use.
Does anyone know if the unit actually supports w bus? Seems an eaier way of connecting stuff up. |
|
|