MG ZT Key Fob

gazcaz · 17th September 2016, 14:33

Hi peeps i have just converted to a Flip Key ,i like it BUT i need the sticker that goes in the middle as per pic,anyone help please ?

WillyHeckaslike · 17th September 2016, 16:31

I could be wrong but I think that the fob badge shown might have been commissioned by member Bobby Brown as part of a limited production run, if so then availability could become a problem if it is not already the case. In anticipation of this some members might wish to try to source an alternative, maybe something which is simple and generic to both Rovers and MGs alike might be preferable looking forward. My thinking being that a simple generic design should help with costs and logistics in both manufacture and supply. Members will each have their own preference but to start the ball rolling how about something like this:

gazcaz · 17th September 2016, 17:52

Quote:

Originally Posted by WillyHeckaslike

I could be wrong but I think that the fob badge shown might have been commissioned by member Bobby Brown as part of a limited production run, if so then availability could become a problem if it is not already the case. In anticipation of this some members might wish to try to source an alternative, maybe something which is simple and generic to both Rovers and MGs alike might be preferable looking forward. My thinking being that a simple generic design should help with costs and logistics in both manufacture and supply. Members will each have their own preference but to start the ball rolling how about something like this:

Very nice yes please

keithst24 · 17th September 2016, 17:58

http://www.ebay.co.uk/itm/2x-BMW-MIN...cAAOSw-YVXl3uq

I bought a set of these as spares ....was going to paint them either same colour as car or yellow to match ''Bumble''

Dallas · 17th September 2016, 20:01

THESE... might work.

WillyHeckaslike · 18th September 2016, 20:35

I've just found a picture online of BMW's oem key fob badge. Interestingly the main winged body looks to be of solid metal construction with a keyed hole for the round Mini logo insert:

gazcaz · 22nd September 2016, 18:18

All done i like it

Dallas · 22nd September 2016, 19:56

Looking good Gaz...

WillyHeckaslike · 22nd September 2016, 23:42

Quote:

Originally Posted by Dallas

Looking good Gaz...

Gets my vote as a good effort too.

Mogodon · 23rd September 2016, 06:17

Looks good but the MG is upside down compared to the OEM mini logo ones and the MG and Rover ones a member supplies on here which I have on mine.

17th September 2016, 17:58	#4
keithst24 This is my second home X Power Grey MGZT 180+ Auto... Bumble & 1.8T Odessey Rover 75 Contemporary SE manual Join Date: Nov 2015 Location: Reigate Posts: 5,375 Thanks: 2,254 Thanked 1,801 Times in 1,403 Posts	http://www.ebay.co.uk/itm/2x-BMW-MIN...cAAOSw-YVXl3uq I bought a set of these as spares ....was going to paint them either same colour as car or yellow to match ''Bumble'' __________________ [SIGPIC][/SIGPIC] Bumble Membership Number 35478 Born Monday, 16th June 2003 @ 14:30:35 This vehicle was the 9,196th ZT to run off the production line, out of 18,894 This vehicle was the 576th ZT 180 + to be made out of 828 This vehicle was the 871st ZT in XPower Grey (code: LEF) to be made out of 3,143 XPower Grey ZTs

23rd September 2016, 06:17	#10
Mogodon Gets stuck in MG ZT 135+ Diesel Auto Mk2. Nisan Micra 1.4 SVE Auto. Join Date: Apr 2015 Location: Wellingborough, Northamptonshire. Posts: 835 Thanks: 196 Thanked 198 Times in 84 Posts	Looks good but the MG is upside down compared to the OEM mini logo ones and the MG and Rover ones a member supplies on here which I have on mine. __________________ Plenum spyhole mod. Powerflow backbox. 11 spoke alloys repainted Black Sparkle. Black Expansion tank. Drivers side cup holder. PPD carpeted heater box sides. Illuminated sun visors, PPD Door reflectors. PPD Seatbelt lower mount bolt covers. PPD Drivers grab handle. Cubby rechargeable torch and power socket. FBH retro-fitted. FBH engine pre-heater mod done. Electric rear Sunblind. Tow bar. Flip key. MGR towing mirrors and Saloon roof bars. Hand Built in Birmingham Last edited by Mogodon; 23rd September 2016 at 06:19.. Reason: Grammar

17th September 2016, 16:31	#2
WillyHeckaslike This is my second home Rovers 75 & 25 Join Date: Oct 2010 Location: Wearside Posts: 4,522 Thanks: 543 Thanked 709 Times in 511 Posts	I could be wrong but I think that the fob badge shown might have been commissioned by member Bobby Brown as part of a limited production run, if so then availability could become a problem if it is not already the case. In anticipation of this some members might wish to try to source an alternative, maybe something which is simple and generic to both Rovers and MGs alike might be preferable looking forward. My thinking being that a simple generic design should help with costs and logistics in both manufacture and supply. Members will each have their own preference but to start the ball rolling how about something like this:

17th September 2016, 20:01	#5
Dallas This is my second home 1979 Capri 1.6L, 1982 Capri 1.6L, 2016 Dacia Stepway Join Date: Jun 2009 Location: Dorset Posts: 8,595 Thanks: 3,496 Thanked 3,397 Times in 2,218 Posts	THESE... might work.

18th September 2016, 20:35	#6
WillyHeckaslike This is my second home Rovers 75 & 25 Join Date: Oct 2010 Location: Wearside Posts: 4,522 Thanks: 543 Thanked 709 Times in 511 Posts	I've just found a picture online of BMW's oem key fob badge. Interestingly the main winged body looks to be of solid metal construction with a keyed hole for the round Mini logo insert:

22nd September 2016, 19:56	#8
Dallas This is my second home 1979 Capri 1.6L, 1982 Capri 1.6L, 2016 Dacia Stepway Join Date: Jun 2009 Location: Dorset Posts: 8,595 Thanks: 3,496 Thanked 3,397 Times in 2,218 Posts	Looking good Gaz...