|
||
|
10th May 2008, 14:53 | #1 |
Banned
MG ZT CDTi 135+ Join Date: Mar 2007
Location: Cardiff
Posts: 1
Thanks: 0
Thanked 5 Times in 2 Posts
|
Anyone got...?
While I'm awaiting kind Les to source some cheap(er) rear blind switches, does anyone fancy lending me one for a day or two just to check mine works?
Will pay postage both ways. Ta muchos |
10th May 2008, 17:30 | #2 |
*
Rover 75 FaceLift Tourer CDTi 170BHP Auto ConnSE 2005 Model Starlight Silver Join Date: Nov 2006
Location: Abergele
Posts: 28,735
Thanks: 0
Thanked 6 Times in 5 Posts
|
Available new at XPart and Rimmers at Only £30.29
Part No: YUG102030PUY Switch-sun-blind. push push Not as Cheap as Les but hardly Expensive to get it going. |
11th May 2008, 00:35 | #3 |
Loves to post
ZT 260 Join Date: Mar 2007
Location: Stroud Glos
Posts: 258
Thanks: 0
Thanked 0 Times in 0 Posts
|
Mine came today, works a treat
|
11th May 2008, 06:28 | #4 |
Gets stuck in
ZT-T CDT 130+ (04) & 75 Tourer CDT Auto (52) & a 1998 MGF (with HGF!) Join Date: Mar 2007
Location: Halifax
Posts: 903
Thanks: 0
Thanked 1 Time in 1 Post
|
I should be getting a rear blind switch that I don't necessarily need this week as it happens. I was going to just put it in anyway and wire it up to something else (maybe some underseat lights or something?)
You can either borrow it for a while or you can have it if you can send me a 3 hole walnut dash panel in return. I only need the 1 x cruise and 2 x heated seat holes anyway so if you can get me one of those you can keep the switch. Think Les has them for about a fiver sometimes which seems a reasonable swap. PM me your address and I will send it once I get it. I'm in no huge rush for the panel so either send the switch back when you are done or just send me a panel at some point in the next month or so.
__________________
Jim Replace in tank fuel pump with Peugeot alternative Dismantle and re-fit interior and seats Retrofit electric memory seats without the loom All followed at your own risk! Available to borrow: I have a home made (tried and tested) Cam Locking tool for M47 should anyone need it. |
11th May 2008, 07:50 | #5 |
*
Rover 75 FaceLift Tourer CDTi 170BHP Auto ConnSE 2005 Model Starlight Silver Join Date: Nov 2006
Location: Abergele
Posts: 28,735
Thanks: 0
Thanked 6 Times in 5 Posts
|
An Extremely Good, Kind offer there efreeti.
Nice one. |
12th May 2008, 05:59 | #6 |
Gets stuck in
ZT-T CDT 130+ (04) & 75 Tourer CDT Auto (52) & a 1998 MGF (with HGF!) Join Date: Mar 2007
Location: Halifax
Posts: 903
Thanks: 0
Thanked 1 Time in 1 Post
|
Are you still out there Mark? PM me if you want to go ahead.
__________________
Jim Replace in tank fuel pump with Peugeot alternative Dismantle and re-fit interior and seats Retrofit electric memory seats without the loom All followed at your own risk! Available to borrow: I have a home made (tried and tested) Cam Locking tool for M47 should anyone need it. |
12th May 2008, 14:12 | #7 |
Banned
MG ZT CDTi 135+ Join Date: Mar 2007
Location: Cardiff
Posts: 1
Thanks: 0
Thanked 5 Times in 2 Posts
|
Hi matey,
PM on its way. Thanks for the kind offer. I'll probably make the swap if you're sure that's ok. |
|
|