|
||
|
19th July 2016, 21:39 | #1 |
Newbie
rover 75 saloon Join Date: Oct 2015
Location: middlesbrough
Posts: 18
Thanks: 0
Thanked 2 Times in 2 Posts
|
adding parking sensor speaker
Can anyone help with how to add a speaker to the parking aid ,the ipk i have is not compatible so need to add a speaker any help thanks .
|
19th July 2016, 21:51 | #2 |
Moderator
MG-ZTT Join Date: Mar 2007
Location: Ware, Herts
Posts: 19,798
Thanks: 161
Thanked 1,249 Times in 1,036 Posts
|
If the wiring is in place, it lives under the rear parcel shelf....(not in the boot)
__________________
David Impecunity is the mother of ingenuity Useful how to's for common problems Car Of The Month Jan 2014 [SatNav Power Down] [Coolant Level] [SatNav Repair] [Diesel Non Starting] [Paint Codes] [Rear Light Seals] [Reversing Light Switch] [Bleeding Brakes][Sunroof Drain] [Early ZT's][Instrument Pack Diagnostics][ATC Diagnostics] |
19th July 2016, 22:21 | #3 |
This is my second home
Back in a Rover Join Date: Nov 2006
Location: Peterborough
Posts: 4,926
Thanks: 131
Thanked 357 Times in 261 Posts
|
I have just added the speaker to my retro fit sensors and the plug was to the left of the rear parcel shelf, I was able to lift the parcel shelf cover up by removing the fixings with the back seat down and connect the plug to speaker and locate it on the shelf
Stubs |
19th July 2016, 22:28 | #4 |
This is my second home
none but not gone Join Date: Mar 2013
Location: March, Cambs
Posts: 16,437
Thanks: 894
Thanked 4,247 Times in 3,025 Posts
|
Be aware the electric rear blind wiring is in that area also
__________________
[SIGPIC][/SIGPIC]….All praise Bananaswan…. |
22nd July 2016, 14:04 | #5 |
Regular poster
Rover 75 CDT Saloon&2x75 CDT Tourer Auto Join Date: Oct 2011
Location: Finland
Posts: 47
Thanks: 0
Thanked 6 Times in 6 Posts
|
Hi,sorry to hijack this thread.
I am also retrofitting paking sensors,but to Tourer. I have set of sensors,ECU,cable harness between sensors/ECU and speaker.Where speaker should be located in Tourer,and is there also wiring readily in a car? If i understand,ECU is located on right side of boot? My car is 2001 Tourer Connoisseur CDT Auto Regards Jussi |
22nd July 2016, 14:09 | #6 | |
Moderator
MG-ZTT Join Date: Mar 2007
Location: Ware, Herts
Posts: 19,798
Thanks: 161
Thanked 1,249 Times in 1,036 Posts
|
Quote:
The ECU lives behind the panel in the load space area on the right hand side
__________________
David Impecunity is the mother of ingenuity Useful how to's for common problems Car Of The Month Jan 2014 [SatNav Power Down] [Coolant Level] [SatNav Repair] [Diesel Non Starting] [Paint Codes] [Rear Light Seals] [Reversing Light Switch] [Bleeding Brakes][Sunroof Drain] [Early ZT's][Instrument Pack Diagnostics][ATC Diagnostics] |
|
22nd July 2016, 14:36 | #7 |
This is my second home
75 Join Date: Nov 2006
Location: Leeds
Posts: 8,432
Thanks: 176
Thanked 907 Times in 716 Posts
|
Dave T |
22nd July 2016, 18:54 | #8 |
This is my second home
Rover 75 Saloon & Tourer Join Date: Sep 2012
Location: Lincoln
Posts: 14,912
Thanks: 1,630
Thanked 3,032 Times in 2,181 Posts
|
I think this may be the parking sensor speaker http://www.rimmerbros.co.uk/Item--i-XQM101370
so if I have understood previous posts, if the ipk does not support parking sensors, I assume this means it does not have a sounder then the above sounder can be used, is that right? kalrzy has given me some advice and said if your IPK starts YAC00**** then it will support PDC. if the ipk does not support parking sensor then a new ipk is required macafee2 Last edited by macafee2; 22nd July 2016 at 18:57.. Reason: more info |
22nd July 2016, 18:56 | #9 | |
This is my second home
none but not gone Join Date: Mar 2013
Location: March, Cambs
Posts: 16,437
Thanks: 894
Thanked 4,247 Times in 3,025 Posts
|
Quote:
__________________
[SIGPIC][/SIGPIC]….All praise Bananaswan…. |
|
22nd July 2016, 19:27 | #10 |
Regular poster
Rover 75 CDT Saloon&2x75 CDT Tourer Auto Join Date: Oct 2011
Location: Finland
Posts: 47
Thanks: 0
Thanked 6 Times in 6 Posts
|
Thank You Duotone,
Looks like ECU and speaker are located to same corner. |
|
|