|
||
|
24th July 2019, 14:54 | #1 |
Avid contributor
MG ZT 190 Join Date: Apr 2016
Location: Heathrow
Posts: 166
Thanks: 109
Thanked 24 Times in 14 Posts
|
Exhaust
Can anyone confirm that Klarius back box part no: RR365H
Is correct for a ZT190 saloon. It only lists it as a 180 for a saloon! But the ZTT lists a different number for 190 but not saloon. Even the helpline was vague!! Ideally a response from someone who's changed theirs. The are slightly different pipe bores which is a worry!! Thanks in advance! Sent from my SM-J730F using Tapatalk |
29th July 2019, 14:10 | #2 |
Loves to post
MG ZT Join Date: Sep 2015
Location: Dunmow
Posts: 352
Thanks: 139
Thanked 83 Times in 72 Posts
|
I believe Klarius R331H (60mm bore) is correct for the ZT 190 (and also the ZT 180 auto and 1.8T). However, be very careful with Klarius. I recently purchased an R331H from Euro Car Parts and my garage couldn't make it fit. They said the link pipe to the centre section had been wrongly welded on to the box so it wouldn't line up with the centre section pipe. I knew the centre section was correctly positioned as it was a genuine OE MG Rover one. I may have been unlucky in getting a faulty item, but be prepared for problems with a Klarius. The problem is you won't know if it fits or not 'til you try; there was no reason to suspect mine from just looking at it.
|
30th July 2019, 17:05 | #3 | |
Avid contributor
MG ZT 190 Join Date: Apr 2016
Location: Heathrow
Posts: 166
Thanks: 109
Thanked 24 Times in 14 Posts
|
Quote:
Sent from my SM-J730F using Tapatalk |
|
31st July 2019, 20:01 | #4 |
Loves to post
MG ZT Join Date: Sep 2015
Location: Dunmow
Posts: 352
Thanks: 139
Thanked 83 Times in 72 Posts
|
That's good to hear. Glad your one went OK!
|
|
|