Crofts is a Diamond.....(finishers!!!) - Page 2

Zeb · 7th April 2008, 08:23

Arrived safely. Thanks.

The Yellow Peril · 7th April 2008, 08:47

Likewise, finishers arrived today (Saturday) along with the snow, so I'll have to wait a while to fit them, but thanks for making this happen

Andrew

sterobbo · 7th April 2008, 16:20

Recieved mine, a quality piece of kit, many thanks crofts...

JohnUser75 · 8th April 2008, 19:17

Received my door finishers yesterday - excellent - looking forward to decent weather so I can fit them. Did a quick double-sided tape on to see what it looks like - brilliant - thought it might be a bit too flash but fits in well. Next thing is to see where I can get the silicone adhesive.

Many thanks to Crofts for all the hard work in get them manufactured to such a good standard - also all the work getting delivery organised, packing etc. Your efforts really appreciated - thanks

lwindridge · 9th April 2008, 11:08

Yep, mine arrived the other day too. Had to collect from the sorting office though as I was out when the postman arrived.
Look absolutely fantastic I must admit - the only problem I had was the car wouldn't start to take me back home!
Had to turn the ignition on and off a few times before it would fire (and as usual found that out after the RAC had been called so had to call them again to cancel the call out!) - first time the trusty CDT's let me down!

Will let the weather settle down a bit before fitting but they do look the business that's for sure!

brinkhuussie · 9th April 2008, 14:38

recieved mine this morning.
Many thanks Croft.

Greetings from the Netherlands.

Gerrit

Geoffrey · 10th April 2008, 20:59

Mine took a bit longer to cross the Channel but they arrived this morning. I can only endorse the appreciative comments left by other members; the results were worth waiting for and we have every reason to be grateful to Crofts for persevering when many others would have given up.
Geoffrey.

Kiwirover · 11th April 2008, 05:10

Thanks Crofts. I received mine today. Already fitted and they look just stunning…

I guess I am going to be "rare" and “unique" in NZ for a while - at least until Roger1 gets his in the next batch.

crofts · 11th April 2008, 23:59

Nice to hear from you all. It's reassuring to hear that they have been received OK. Of the 150 posted out now not one set, to my knowledge, has been lost in the post.
Especially good to hear that KiwiRover received his OK. Now what about that set that went to Wongoonoo Avenue, Bangalee, Nowra, NSW, Australia................ (suppose you have to fit them upside-down there ! ? ! ?

7th April 2008, 08:47	#12
The Yellow Peril Posted a thing or two Primrose Yellow 75 V6 Conn SE Join Date: Feb 2007 Location: Hoar Cross, Staffordshire Posts: 1,176 Thanks: 23 Thanked 49 Times in 11 Posts	Likewise, finishers arrived today (Saturday) along with the snow, so I'll have to wait a while to fit them, but thanks for making this happen Andrew __________________ The Yellow Peril. Connesseur SE 2.5V6 Petrol Auto. Lovingly cared for, since 2000

9th April 2008, 11:08	#15
lwindridge Regular poster Rover 75 CDT Conn SE Tourer Join Date: Jun 2007 Location: Nottinghamshire Posts: 81 Thanks: 0 Thanked 0 Times in 0 Posts	Yep, mine arrived the other day too. Had to collect from the sorting office though as I was out when the postman arrived. Look absolutely fantastic I must admit - the only problem I had was the car wouldn't start to take me back home! Had to turn the ignition on and off a few times before it would fire (and as usual found that out after the RAC had been called so had to call them again to cancel the call out!) - first time the trusty CDT's let me down! Will let the weather settle down a bit before fitting but they do look the business that's for sure! __________________ Leigh Windridge 2001 75 CDT Connoisseur SE Tourer Last edited by GreyGhost; 9th April 2008 at 11:47..

10th April 2008, 20:59	#17
Geoffrey Avid contributor Rover 75 saloon cdti + 214 Join Date: Jan 2007 Location: Rennes. Posts: 111 Thanks: 0 Thanked 2 Times in 1 Post	Door finishers Mine took a bit longer to cross the Channel but they arrived this morning. I can only endorse the appreciative comments left by other members; the results were worth waiting for and we have every reason to be grateful to Crofts for persevering when many others would have given up. Geoffrey.

11th April 2008, 05:10	#18
Kiwirover Loves to post 1999 75 Con SE 2.5 Auto Join Date: May 2007 Location: Lower Hutt Posts: 326 Thanks: 3 Thanked 2 Times in 2 Posts	Thanks Crofts. I received mine today. Already fitted and they look just stunning… I guess I am going to be "rare" and “unique" in NZ for a while - at least until Roger1 gets his in the next batch. __________________ Regards, Gillian

11th April 2008, 23:59	#19
crofts I really should get out more....... 2003 Rover 75 Conn. SE Auto Tourer 131 ps CDTi Join Date: Nov 2006 Location: Bristol Posts: 2,512 Thanks: 38 Thanked 67 Times in 55 Posts	Thanks for your thanks Nice to hear from you all. It's reassuring to hear that they have been received OK. Of the 150 posted out now not one set, to my knowledge, has been lost in the post. Especially good to hear that KiwiRover received his OK. Now what about that set that went to Wongoonoo Avenue, Bangalee, Nowra, NSW, Australia................ (suppose you have to fit them upside-down there ! ? ! ? __________________ Rover 75 CDTi SE Connoisseur Tourer (2003) In desirable STARLIGHT SILVER (now restored to it's former glory with all the chrome !)

7th April 2008, 08:23	#11
Zeb Banned MGZT V8 & ZTT 190+LPG Join Date: Nov 2006 Posts: 8,089 Thanks: 0 Thanked 0 Times in 0 Posts	Arrived safely. Thanks.

7th April 2008, 16:20	#13
sterobbo Regular poster MG ZT 2.5 /Golf gti Join Date: Mar 2007 Location: Middlesbrough Posts: 93 Thanks: 2 Thanked 0 Times in 0 Posts	Recieved mine, a quality piece of kit, many thanks crofts...

8th April 2008, 19:17	#14
JohnUser75 Newbie Rover 75 Saloon Conn CDT SE Auto Join Date: Oct 2007 Location: Hampshire Posts: 23 Thanks: 0 Thanked 0 Times in 0 Posts	Received my door finishers yesterday - excellent - looking forward to decent weather so I can fit them. Did a quick double-sided tape on to see what it looks like - brilliant - thought it might be a bit too flash but fits in well. Next thing is to see where I can get the silicone adhesive. Many thanks to Crofts for all the hard work in get them manufactured to such a good standard - also all the work getting delivery organised, packing etc. Your efforts really appreciated - thanks

9th April 2008, 14:38	#16
brinkhuussie Newbie MG ZT 135 cdti Join Date: Feb 2008 Location: Wijhe, Holland Posts: 9 Thanks: 0 Thanked 0 Times in 0 Posts	recieved mine this morning. Many thanks Croft. Greetings from the Netherlands. Gerrit