|
||
|
1st July 2021, 10:44 | #1 |
Posted a thing or two
Rover 75 Saloon MGZT Join Date: Jul 2012
Location: Perth, AUSTRALIA
Posts: 1,664
Thanks: 3
Thanked 461 Times in 299 Posts
|
vacum one way valve
Was checking the ZT (2.5 v6) out the other day and noticed a vacum leak coming from the small one way valve on the pipe that comes from the rear
head. The valve is inline and comes up to a T piece in the vacum line to the throttle body. Are you able to buy the valves separately ? |
1st July 2021, 14:21 | #2 |
This is my second home
Rover75 and Mreg Corsa. Join Date: Nov 2006
Location: Sumweer onat mote o'dust (Sagin)
Posts: 21,753
Thanks: 341
Thanked 3,660 Times in 2,924 Posts
|
Is it the central bit of this? https://rimmerbros.com/Item--i-MLH100550L
If so, they aren't listed as a separate part, so you'll have to seek out a second hand one or maybe locate a suitable valve on eBay, etc. TC |
2nd July 2021, 03:24 | #3 |
Posted a thing or two
Rover 75 Saloon MGZT Join Date: Jul 2012
Location: Perth, AUSTRALIA
Posts: 1,664
Thanks: 3
Thanked 461 Times in 299 Posts
|
hi tc, it is the short length of breather pipe that is connected to the small pipe from the front rocker cover, where the T piece is, it goes down to the side of the rear rocket cover.
There is a small valve just under the T piece . I think there is a listing for that pipe with the valve but not sure. Getting access to the re plug point on the head looks a pain so thought of cutting the pipe, put a joiner and a new valve. I assume its a one way valve ? |
|
|