|
||
|
18th April 2019, 21:04 | #1 |
Regular poster
ROVER 75 Join Date: Feb 2018
Location: ROME
Posts: 63
Thanks: 4
Thanked 2 Times in 1 Post
|
clutch kit and flywheel replacement
Hello
I need to replace my clutch and I would like to know everything that I need to give to my mechanic in order to do the job I already bought new LUK clutch kit, LUK flywheel, and slave cylinder (the brand is all brake system) at a very good price: 250 GBP --------------------------------------------- LuK Clutch kit 623 3145 09 https://www.amazon.co.uk/LuK-623-314...e&sr=1-1-spell --------------------------------------------- Luke Flywheel 415 0237 10 https://www.amazon.co.uk/LUK-4150237...r=1-3-fkmrnull ------------------------------ all brake system slave cylinder https://www.amazon.co.uk/ABS-51236-S.../dp/B00CPNLJ96 1) first question the slave cylinder is compatible with the clutch kit, even if the brand are different 2) Do I need to replace the clutch seal? If yes, anyone could kindly give me the specs or the link to buy these? 3) do I need some other stuff like particular screws? if yes, as 2) anyone could kindly give me the specs or the link to buy these? 4) do i need to replace the master cylinder, or it is not regarded to the work due to replace clutch? thanks in advance to anyone that could help me |
19th April 2019, 10:00 | #2 |
This is my second home
Rover 75 Saloon & Tourer Join Date: Sep 2012
Location: Lincoln
Posts: 14,931
Thanks: 1,630
Thanked 3,032 Times in 2,181 Posts
|
1. yes compatible but are the pipes bent in the correct direction
3. Haynes manual does recommend changing drive shaft circle on left side and nuts and bolts at the hub 4. which ever you do you could be wrong, your master cylinder could fail next week or 5 years down the road you may want to replace the shaft the slave cylinder sits on macafee2 |
19th April 2019, 20:47 | #3 |
MG ZT Join Date: Jan 2011
Location: Newcastle Upon Tyne
Posts: 20,151
Thanks: 3,565
Thanked 10,837 Times in 5,718 Posts
|
Given you are replacing the DMF and using a quality clutch kit, I would not use anything other than an LUK slave with the kit.
If you have not already bought the components, then a full kit can be found HERE If you have already bought the components except the slave cylinder, then buy one of THESE And if you have not bought anything yet, then you could always buy a rover branded three part clutch kit HERE It is not always necessary to replace the DMF as these tend to be fairly robust, however in fifteen clutches I've replaced on the 75 range, one has included a DMF. I would not use a "brand X" slave cylinder, as the amount of labour involved is the same as changing a complete clutch assembly. Hope this helps Brian |
19th April 2019, 22:55 | #4 | |
Regular poster
ROVER 75 Join Date: Feb 2018
Location: ROME
Posts: 63
Thanks: 4
Thanked 2 Times in 1 Post
|
Quote:
do I need to buy screws kit for flywheel, since in the description of flywheel it is specified that screws are not included what about question 2) and 3) ? Last edited by squall89; 19th April 2019 at 22:59.. |
|
19th April 2019, 23:02 | #5 | |
Regular poster
ROVER 75 Join Date: Feb 2018
Location: ROME
Posts: 63
Thanks: 4
Thanked 2 Times in 1 Post
|
Quote:
could you kindly send me any links of these items? |
|
21st April 2019, 19:41 | #7 |
Regular poster
ROVER 75 Join Date: Feb 2018
Location: ROME
Posts: 63
Thanks: 4
Thanked 2 Times in 1 Post
|
this can be useful or not?
https://www.autodoc.co.uk/elring/206826 sorry but I'm not an expert so I would give to my mechanic all the necessary to do well the work |
21st April 2019, 19:53 | #8 | |
MG ZT Join Date: Jan 2011
Location: Newcastle Upon Tyne
Posts: 20,151
Thanks: 3,565
Thanked 10,837 Times in 5,718 Posts
|
Quote:
|
|
21st April 2019, 20:51 | #9 |
This is my second home
Rover 75 Saloon & Tourer Join Date: Sep 2012
Location: Lincoln
Posts: 14,931
Thanks: 1,630
Thanked 3,032 Times in 2,181 Posts
|
I'm assuming you have a diesel, if not can you update your profile to show what car you have.
shaft for slave cylinder https://www.dmgrs.co.uk/collections/clutch-transmission-parts/products/r75-mg-zt-slave-cylinder-guide-tube-input-shaft-seal-utl100081 drive shaft circlip, number 9 https://rimmerbros.com/Item--i-GRID001540 nut and bolt at hub, items 3 and 4 https://rimmerbros.com/Item--i-GRID001544 nut item 6 or 8 same part number. Same for left hand and right hand drive https://rimmerbros.com/Item--i-GRID002021 macafee2 |
22nd April 2019, 22:06 | #10 |
Regular poster
ROVER 75 Join Date: Feb 2018
Location: ROME
Posts: 63
Thanks: 4
Thanked 2 Times in 1 Post
|
great!!
thanks |
|
|