|
||
|
20th February 2019, 20:03 | #1 |
Gets stuck in
Rover 75 Connie SE 2.5 V6 Auto Join Date: Aug 2015
Location: Stevenage
Posts: 619
Thanks: 619
Thanked 253 Times in 182 Posts
|
KV6 Lower Engine Mount removal query.. SORTED
Evening all,
Crawling underneath the car changing oil and filter the other day, I thought I'd remove the lower engine mount to check it and replace if required. As you do ... Heat shield off and both engine mount bolts loosened eezy peezy! Then I noticed that the bolt through the larger end of the mount is in line with a sensor attached to the exhaust (see attached picture .... apologies if it appears upside down ) So the query is .... is there enough space to remove/wiggle that bolt past that sensor? I've assumed you can't "swing" the engine a bit to make some room as the exhaust would swing with it? I'm talking 2.5 V6 here, not the 1.8 or Diesel. Anyone changed the mount on the V6 with the same sensor? All advice/experience welcome Happy Roving! John
__________________
. My 2.5 V6 Connoisseur SE Auto 75 is the 20,516th 75 to be made out of 112,381 787th 2.5 V6 Connoisseur SE to be made out of 3,671 1,248th Wedgwood Blue Metallic (code: JBH) to be made out of 7,515 code JBH 75's Last edited by grout20; 24th February 2019 at 18:20.. Reason: Final solution |
|
|