|
||
|
5th June 2019, 12:25 | #1 |
This is my second home
All Trophy Blue ,ZT260#50 , ZT CDTI Auto, ZR105+ and 1.8T Firefrost spoiling the Set . Join Date: Nov 2006
Location: Nr Sherborne But in Somerset..
Posts: 6,077
Thanks: 916
Thanked 1,214 Times in 768 Posts
|
Intermediate drive shaft
Has Anyone taken this apart to put a new bearing in the housing "C" ?
How does it come apart ? ta ..
__________________
The Three Bloo's Wifey's Zr105, MY CDTI & 260 #50 and Number One sons 1.8T in Firefrost When I were a lad Zero to 142 in 10.25 secs at the Pod on my Blown Norton. 210 Kart Champ in 70's |
5th June 2019, 14:14 | #2 |
Posted a thing or two
Rover 75 Saloon Join Date: Apr 2019
Location: Under the car
Posts: 1,840
Thanks: 210
Thanked 244 Times in 221 Posts
|
Looks like A/B are an interference fit on C - i.e. grip shaft B in the vice and whack(), sorry tap, bracket C to the left (as viewed in your pic). Mind the casting C doesn't break.
See here (9th & 11th pics down) - http://retrorides.proboards.com/thre...rollTo=2053738 Last edited by Blink; 5th June 2019 at 14:31.. |
5th June 2019, 14:22 | #3 |
Posted a thing or two
Rover 75 Saloon Join Date: Apr 2019
Location: Under the car
Posts: 1,840
Thanks: 210
Thanked 244 Times in 221 Posts
|
And rest of pics below 11th (to next post re Volvo 760).
|
5th June 2019, 14:28 | #4 |
Posted a thing or two
Rover 75 Saloon Join Date: Apr 2019
Location: Under the car
Posts: 1,840
Thanks: 210
Thanked 244 Times in 221 Posts
|
Can't even find a part number for that bracket/bearing housing so probably best not to break it.
https://rimmerbros.com/Item--i-GRID001538 |
5th June 2019, 14:36 | #5 |
Gets stuck in
75 Tourer CDT MK2 manual in Glorious Grey Join Date: Jan 2018
Location: Slovakia
Posts: 987
Thanks: 926
Thanked 346 Times in 252 Posts
|
Thanks Blink. That was awesome.
Cheers, Glenn
__________________
Southern Slovakia Anything can happen in Formula 1 and usually does - Murray Walker 1999 Triumph Trophy 900, Saddlesore 1600, Iron Butt Riders Association #63720 2005 Rover 75 CDT Tourer MK2 |
5th June 2019, 14:48 | #6 |
Posted a thing or two
Rover 75 Saloon Join Date: Apr 2019
Location: Under the car
Posts: 1,840
Thanks: 210
Thanked 244 Times in 221 Posts
|
Hmm. Not going to be easy getting that bearing off methinks (and keep the casting intact). The bearing in the pics was cracked so it came off easier than it would otherwise.
|
5th June 2019, 16:01 | #7 |
This is my second home
All Trophy Blue ,ZT260#50 , ZT CDTI Auto, ZR105+ and 1.8T Firefrost spoiling the Set . Join Date: Nov 2006
Location: Nr Sherborne But in Somerset..
Posts: 6,077
Thanks: 916
Thanked 1,214 Times in 768 Posts
|
A good thrashing is looming
__________________
The Three Bloo's Wifey's Zr105, MY CDTI & 260 #50 and Number One sons 1.8T in Firefrost When I were a lad Zero to 142 in 10.25 secs at the Pod on my Blown Norton. 210 Kart Champ in 70's Last edited by ceedy; 5th June 2019 at 16:06.. |
5th June 2019, 19:39 | #8 |
This is my second home
Rover 75 CDT Manual Connoisseur SE, Rover 75 CDT Automatic Connoisseur SE & a Freelander Td4. Join Date: Jul 2009
Location: Hampshire
Posts: 11,553
Thanks: 3,470
Thanked 3,119 Times in 2,247 Posts
|
Save all the hassle - send Mickyboy a PM and buy another driveshaft complete with support bearing.
|
|
|