Torque App ??

keithst24 · 30th May 2016, 16:12

Hi
Anyone use this app as mine wont show MPH ?, Rev's are working ....any ideas ?
Cheers Keith

KRISTLEE · 30th May 2016, 16:20

Quote:

Originally Posted by keithst24

Hi
Anyone use this app as mine wont show MPH ?, Rev's are working ....any ideas ?
Cheers Keith

I'm using Torque on my tablet and it's working ok... I did need to upgrade to Torque Pro (think it cost 2.99) to enable some features but I can't remember if mph was one of the functions displayed once upgraded.

keithst24 · 30th May 2016, 16:30

Quote:

Originally Posted by KRISTLEE

I'm using Torque on my tablet and it's working ok... I did need to upgrade to Torque Pro (think it cost 2.99) to enable some features but I can't remember if mph was one of the functions displayed once upgraded.

Hi Mate

Cheers, mine is the Pro version.....maybe its an issue between ECU and OBD reader?

KRISTLEE · 30th May 2016, 16:37

Quote:

Originally Posted by keithst24

Hi Mate

Cheers, mine is the Pro version.....maybe its an issue between ECU and OBD reader?

I'm not too sure then mate if you are already using Torque Pro...is your car OBD2? My reader that plugs into the OBD socket is ELM327 if that makes any difference.

roverbarmy · 30th May 2016, 16:56

You have to enable location on your phone (GPS?)

mike

keithst24 · 30th May 2016, 16:58

Quote:

Originally Posted by roverbarmy

You have to enable location on your phone (GPS?)

mike

Cheers, i think thats on but will have a play tomorrow....i also have another reader so will swap to see if it makes any difference.

The Rovering Member · 30th May 2016, 22:51

Mine has a choice of GPS-sourced MPH or that from the ECU.
It's the basic version Torque app.

Astraeus · 31st May 2016, 06:08

Quote:

Originally Posted by keithst24

Hi Mate

Cheers, mine is the Pro version.....maybe its an issue between ECU and OBD reader?

Worth checking OBD compliance and if you can get any OBD reader to work on your car. My old 1.8 52 plate woukd not communicate with any OBD reader we tried but connected perfectly to a T4. Although due to year you would think it should mine would not.

Also my V6 which is a year 2000 Cowley car does not either.

Have found this a couple of times.

Worth checking

Chris

keithst24 · 31st May 2016, 09:45

Cheers Chris
Mine is working on some readings and I can run ecu check etc...just the MPH needle not moving....going have a play later if it stops raining.

Keithst24 .....Winnie

Sector-9 · 31st May 2016, 09:51

I can confirm the app works on a pre-EOBD CDT so it could be an issue with your EOBD adaptor (some are better than others). If you can't get the speed to be read from the ECU then use GPS as the source for the app instead

30th May 2016, 16:12	#1
keithst24 This is my second home X Power Grey MGZT 180+ Auto... Bumble & 1.8T Odessey Rover 75 Contemporary SE manual Join Date: Nov 2015 Location: Reigate Posts: 5,375 Thanks: 2,254 Thanked 1,801 Times in 1,403 Posts	Torque App ?? Hi Anyone use this app as mine wont show MPH ?, Rev's are working ....any ideas ? Cheers Keith __________________ [SIGPIC][/SIGPIC] Bumble Membership Number 35478 Born Monday, 16th June 2003 @ 14:30:35 This vehicle was the 9,196th ZT to run off the production line, out of 18,894 This vehicle was the 576th ZT 180 + to be made out of 828 This vehicle was the 871st ZT in XPower Grey (code: LEF) to be made out of 3,143 XPower Grey ZTs

30th May 2016, 16:56	#5
roverbarmy This is my second home Roverless + 1.7D Sportage Join Date: Aug 2014 Location: East Norfolk Posts: 7,050 Thanks: 729 Thanked 2,021 Times in 1,449 Posts	You have to enable location on your phone (GPS?) mike __________________ Oil in my veins!

30th May 2016, 22:51	#7
The Rovering Member I really should get out more....... Rover 75 saloon Join Date: Feb 2014 Location: London Posts: 2,958 Thanks: 263 Thanked 538 Times in 431 Posts	Mine has a choice of GPS-sourced MPH or that from the ECU. It's the basic version Torque app. __________________ Reducing the size of my Rover fleet by adding a 75 to it.

31st May 2016, 09:45	#9
keithst24 This is my second home X Power Grey MGZT 180+ Auto... Bumble & 1.8T Odessey Rover 75 Contemporary SE manual Join Date: Nov 2015 Location: Reigate Posts: 5,375 Thanks: 2,254 Thanked 1,801 Times in 1,403 Posts	Cheers Chris Mine is working on some readings and I can run ecu check etc...just the MPH needle not moving....going have a play later if it stops raining. Keithst24 .....Winnie __________________ [SIGPIC][/SIGPIC] Bumble Membership Number 35478 Born Monday, 16th June 2003 @ 14:30:35 This vehicle was the 9,196th ZT to run off the production line, out of 18,894 This vehicle was the 576th ZT 180 + to be made out of 828 This vehicle was the 871st ZT in XPower Grey (code: LEF) to be made out of 3,143 XPower Grey ZTs

31st May 2016, 09:51	#10
Sector-9 Gets stuck in Rover 75 CDT manual Tourer Join Date: Aug 2014 Location: nr. Mansfield Posts: 767 Thanks: 24 Thanked 182 Times in 137 Posts	I can confirm the app works on a pre-EOBD CDT so it could be an issue with your EOBD adaptor (some are better than others). If you can't get the speed to be read from the ECU then use GPS as the source for the app instead __________________ Free fault codes scan/clear (TOAF) - M1 J27 area