VIS motors - testing on car

mikeh · 2nd June 2010, 09:44

Hi, iv'e just resoldered the switches on the power and balance motors as they were both loose. On reconnection to the car they both reset. Should they do a complete test cycle as well or just move to the default position for ignition.
Thanks.

BigRuss · 2nd June 2010, 10:18

They just return to the default position when the ignition is turned on.

Russ

mikeh · 2nd June 2010, 10:20

Ok, thank you.

2nd June 2010, 09:44	#1
mikeh Regular poster Rover 75 Saloon Join Date: Nov 2006 Location: South Croydon Posts: 71 Thanks: 25 Thanked 2 Times in 2 Posts	VIS motors - testing on car Hi, iv'e just resoldered the switches on the power and balance motors as they were both loose. On reconnection to the car they both reset. Should they do a complete test cycle as well or just move to the default position for ignition. Thanks.

2nd June 2010, 10:18	#2
BigRuss Premium Trader 75 CDT Tourer,2.5 Launch Saloon, Omipro MG/Rover (T4) Join Date: Jul 2007 Location: Liversedge, West Yorkshire Posts: 5,405 Thanks: 1,105 Thanked 1,340 Times in 661 Posts	They just return to the default position when the ignition is turned on. Russ __________________ Replacement Key Service http://https://the75andztclub.co.uk/...d.php?t=244732 Full T4 Testbook diagnostics available. Diesel ECU repair and replacement. Options enabled or disabled as required. Diesel X-Power 135 and 160bhp, Rover 1.8T 150 to 160 MG 160 V6 to 177 upgrades available P.M. for details.

2nd June 2010, 10:20	#3
mikeh Regular poster Rover 75 Saloon Join Date: Nov 2006 Location: South Croydon Posts: 71 Thanks: 25 Thanked 2 Times in 2 Posts	Ok, thank you.