Wanted - CDTi air cleaner grommet/seal

ceetdm · 17th March 2023, 15:28

Hi,

I'm after the grommet that seals against the turbo Air intake, it sits inside the duct from the maf housing to turbo (air cleaner assembly).

Anyone got one available?

Tommy :-)

Arctic · 17th March 2023, 22:35

Quote:

Originally Posted by ceetdm

Hi,

I'm after the grommet that seals against the turbo Air intake, it sits inside the duct from the maf housing to turbo (air cleaner assemby).

Anyone got one available?

Tommy :-)

Hi Tommy.
I would imagine any 25mm grommet would do the job, i have quite a few what i use for the plenum spyhole mod, if you send me your name and address i will post a couple out to you FOC to try if you like.

1

2

ceetdm · 18th March 2023, 01:17

Thank you Artic, that is very good of you, but I'm not sure 25mm will do it? The part I am looking for is on the round end of the air cleaner, no 5 in image below. I think I might have a large grommet I could try until I obtain the correct grommet.

I have seen a post where someone asked if there should be a seal there and you replied with a yes there definitely should. I had the very same question recently :-(

https://rimmerbros.com/Item--i-GRID001955

Tommy :-)

Arctic · 18th March 2023, 14:00

Quote:

Originally Posted by ceetdm

Thank you Artic, that is very good of you, but I'm not sure 25mm will do it? The part I am looking for is on the round end of the air cleaner, no 5 in image below. I think I might have a large grommet I could try until I obtain the correct grommet.

I have seen a post where someone asked if there should be a seal there and you replied with a yes there definitely should. I had the very same question recently :-(

https://rimmerbros.com/Item--i-GRID001955

Tommy :-)

Hi Tom.
That is the rubber seal for the MAF air ducting to the turbo.

1

2

3

https://rimmerbros.com/Item--i-PJZ100170

https://www.famousfour.co.uk/new_par...art?part=19349

17th March 2023, 15:28	#1
ceetdm Loves to post Rover 75 CDTi Manual Saloon + Rover 75 CDTi Auto Saloon Join Date: May 2007 Location: Edinburgh Posts: 415 Thanks: 170 Thanked 42 Times in 33 Posts	Wanted - CDTi air cleaner grommet/seal Hi, I'm after the grommet that seals against the turbo Air intake, it sits inside the duct from the maf housing to turbo (air cleaner assembly). Anyone got one available? Tommy :-) __________________ Rover 75 Saloon CDTi Contemporary SE +pack Last edited by ceetdm; 18th March 2023 at 01:07..

18th March 2023, 01:17	#3
ceetdm Loves to post Rover 75 CDTi Manual Saloon + Rover 75 CDTi Auto Saloon Join Date: May 2007 Location: Edinburgh Posts: 415 Thanks: 170 Thanked 42 Times in 33 Posts	Thank you Artic, that is very good of you, but I'm not sure 25mm will do it? The part I am looking for is on the round end of the air cleaner, no 5 in image below. I think I might have a large grommet I could try until I obtain the correct grommet. I have seen a post where someone asked if there should be a seal there and you replied with a yes there definitely should. I had the very same question recently :-( https://rimmerbros.com/Item--i-GRID001955 Tommy :-) __________________ Rover 75 Saloon CDTi Contemporary SE +pack Last edited by ceetdm; 18th March 2023 at 01:21..