vis cog wheel

garry62be · 30th November 2008, 08:40

Can anyone tell me which way the white cog wheel in balance vis goes or a pic of one inside a motor? Is the raised piece on the wheel meant to sit in between the two micro switches?
thanks

stocktake · 30th November 2008, 12:20

Hi Garry,

On the balance VIS ( the one on the side of the manifold) there is a small arrow on the shaft of the cog, this must be placed in the arc shown by a line on the underside of the casing

HTH

30th November 2008, 08:40	#1
garry62be Avid contributor rover 75 2.5l Join Date: Sep 2008 Location: bodelwyddan,n.wales Posts: 129 Thanks: 0 Thanked 0 Times in 0 Posts	picture of vis cog Can anyone tell me which way the white cog wheel in balance vis goes or a pic of one inside a motor? Is the raised piece on the wheel meant to sit in between the two micro switches? thanks Last edited by Simon; 30th November 2008 at 11:30.. Reason: Merging two posts into one

30th November 2008, 12:20	#2
stocktake Vis Whiz Rover 75 2.5 auto Saloon Join Date: Jun 2007 Location: LEEDS Posts: 20,591 Thanks: 2,057 Thanked 3,056 Times in 1,621 Posts	Hi Garry, On the balance VIS ( the one on the side of the manifold) there is a small arrow on the shaft of the cog, this must be placed in the arc shown by a line on the underside of the casing HTH __________________ Dave... Lost a few stones and a Gall Bladder and part of a bile duct and all of my dignity in the suppository incident