|
||
|
14th November 2013, 13:48 | #1 |
Posted a thing or two
75 Conn S.E. Cdt. Join Date: May 2007
Location: Merseyside
Posts: 1,803
Thanks: 1,873
Thanked 52 Times in 49 Posts
|
Fbh number.
I have a cdt 02 75 with a fbh problem, I need to know which model I have so I can either add 12v or short the relevant pins. I don't see either of the two numbers I am supposed to find, they are not on the Webasto label on the front. Anyone help please?. Thanks, John.
|
14th November 2013, 16:07 | #2 |
Avid contributor
Rover 75 Saloon Join Date: Feb 2012
Location: Rotherham
Posts: 232
Thanks: 107
Thanked 73 Times in 46 Posts
|
Hi John
The number is on the label at the front of the heater below what looks like a bar code. It is difficult to see with the heater inn place - easier if you loosen the fixing bolts and ease it up a little. |
14th November 2013, 17:10 | #3 | |
This is my second home
Rover 75 Saloon Join Date: Aug 2007
Location: Avignon
Posts: 4,466
Thanks: 94
Thanked 661 Times in 554 Posts
|
Quote:
Hoping it helps : Override1.jpg Mike |
|
14th November 2013, 20:18 | #4 |
Posted a thing or two
75 Conn S.E. Cdt. Join Date: May 2007
Location: Merseyside
Posts: 1,803
Thanks: 1,873
Thanked 52 Times in 49 Posts
|
Many thanks Boater and FrenchMike, that is my job for the weekend. I don't understand the numbering of the pins, is it bottom left is number one and bottom right is number six?.
Last edited by lathbury; 14th November 2013 at 20:21.. |
14th November 2013, 21:05 | #5 |
This is my second home
Rover 75 Saloon Join Date: Aug 2007
Location: Avignon
Posts: 4,466
Thanks: 94
Thanked 661 Times in 554 Posts
|
|
17th November 2013, 13:41 | #6 |
Posted a thing or two
75 Conn S.E. Cdt. Join Date: May 2007
Location: Merseyside
Posts: 1,803
Thanks: 1,873
Thanked 52 Times in 49 Posts
|
I have done as Boater suggested, lifted the fbh up amd written down the numbers, they are"9004621B and 98570C", which is the model number. I have a red/white wire in pin2, to test it do I remove the wire from the heater and put the test wire in the hole and does the ignition have to be on or off?.
|
17th November 2013, 15:18 | #7 | |
This is my second home
Rover 75 Saloon Join Date: Aug 2007
Location: Avignon
Posts: 4,466
Thanks: 94
Thanked 661 Times in 554 Posts
|
Quote:
Only put and MAINTAIN test wire in the hole . (pin 3 to earth) |
|
18th November 2013, 11:35 | #8 |
Posted a thing or two
75 Conn S.E. Cdt. Join Date: May 2007
Location: Merseyside
Posts: 1,803
Thanks: 1,873
Thanked 52 Times in 49 Posts
|
Okay, I will try that later. Thanks.
|
|
|