|
||
|
25th July 2018, 17:14 | #11 |
This is my second home
75 Join Date: Nov 2006
Location: Leeds
Posts: 8,432
Thanks: 176
Thanked 907 Times in 716 Posts
|
The Symphony and changer relies on a K Bus connection for full operation.
The changer is connected to the Symphony via the Blue mini ISO plug. The K bus is connected to the Blue mini iso plug pin 19. You will have to find a K Bus wire in the car loom [there is a K Bus connection in one of the plugs to the IPK Speedo/rev counter]. Just solder/connect onto the white/red/yellow at the IPK end and then connect this wire to the wire going into pin 19 blue mini ISO plug. This is what the Blue mini ISO plug should look like.. Ignore the Yellow and Green mini ISO plugs in the picture. Dave T |
26th July 2018, 08:57 | #12 |
Avid contributor
Rover 75 Saloon CDTi, MG ZT CDTi Join Date: Apr 2016
Location: Portarlington
Posts: 135
Thanks: 66
Thanked 25 Times in 19 Posts
|
Quote:
Thank you Dave.....I will try that this weekend..... This is my Thrid Rover 75 its a 2005 V6 with LGP conversation, its a project car for me to slowly work on.... |
28th July 2018, 12:52 | #13 |
Avid contributor
Rover 75 Saloon CDTi, MG ZT CDTi Join Date: Apr 2016
Location: Portarlington
Posts: 135
Thanks: 66
Thanked 25 Times in 19 Posts
|
oK SO i took out the IPK from the car and I have disconnected the plugs to the cluster, but I am still unable to locate the K-bus wire.....use be going blind.
Does anyone know where the wire is on the plug to the ipk. |
28th July 2018, 14:27 | #14 |
I really should get out more.......
Now Other Manufacturer Join Date: Nov 2006
Location: Co. Kerry
Posts: 2,786
Thanks: 16
Thanked 310 Times in 283 Posts
|
Should be in pin 3 of the 18 pin connector in the IPK.
|
29th July 2018, 15:50 | #15 |
Avid contributor
Rover 75 Saloon CDTi, MG ZT CDTi Join Date: Apr 2016
Location: Portarlington
Posts: 135
Thanks: 66
Thanked 25 Times in 19 Posts
|
HI Guys
Thanks for all your Help ....I now have a working CD changer...Radio seen now sees it... Many thanks guys..... One more question What cables do I have to move to get the steering controls to work...... They are currently in the green ISO.... |
29th July 2018, 17:53 | #16 |
Avid contributor
Rover 75 Saloon CDTi, MG ZT CDTi Join Date: Apr 2016
Location: Portarlington
Posts: 135
Thanks: 66
Thanked 25 Times in 19 Posts
|
Ok so I have the cd working/mounted in the glove box and I am happy...
Could some one help me out on the following issue... My steering controls do not seem to be working...... I have the Green ISO connection in the radio, but they do not function... Any help???? Do I need to use the grey connection, and wire the wires to port 2& 3? |
29th July 2018, 19:52 | #17 |
I really should get out more.......
Now Other Manufacturer Join Date: Nov 2006
Location: Co. Kerry
Posts: 2,786
Thanks: 16
Thanked 310 Times in 283 Posts
|
|
29th July 2018, 20:31 | #18 |
This is my second home
75 Join Date: Nov 2006
Location: Leeds
Posts: 8,432
Thanks: 176
Thanked 907 Times in 716 Posts
|
|
29th July 2018, 20:57 | #19 |
Avid contributor
Rover 75 Saloon CDTi, MG ZT CDTi Join Date: Apr 2016
Location: Portarlington
Posts: 135
Thanks: 66
Thanked 25 Times in 19 Posts
|
Thanks guys...
You are the best... I will have a look at this during the week and let you know how it goes...... |
30th July 2018, 15:23 | #20 |
Avid contributor
Rover 75 Saloon CDTi, MG ZT CDTi Join Date: Apr 2016
Location: Portarlington
Posts: 135
Thanks: 66
Thanked 25 Times in 19 Posts
|
Well guys all working...Thank you for all your help
|
|
|