|
||
|
18th December 2020, 20:10 | #1 |
Trader
Mk1 2004 tourer cdti + MK1 2003 Saloon CDT Join Date: Nov 2015
Location: west yorkshire
Posts: 495
Thanks: 106
Thanked 91 Times in 57 Posts
|
Kv6 fuel feed pipe to injection rail ?
Hi folks,
Still awaiting parts to turn up, thankfully the seals for the fuel feed pipe arrived. The pipe in question is a metal pipe that clicks into the end of the fuel feed pipe that is held in place with a metal clip and a few seals and spacers. Because my.old seals were in a poor state when removing the feed pipe, it's hard to determine whether I have inadvertantly lost one spacer. Here is a snapshot from someone working on their zs V6 I have the metal.securing clip Plastic spacer that has a wider base at one end to sit flush against the metal clip O ring Second o ring I'm sure between the two o rings there should be a really tiny spacer but.. I maybe missing this piece and I would sooner have this spacer in place despite it appearing very tight and secure at present time. If anyone can confirm that there should be two small black plastic spacers or any pics etc Thanks Rob |
|
|