Filters for Rover 75 PCV and other parts urgently needed

garyiryna · 19th May 2021, 16:10

Can anyone help , i need a PCV FILTER, for Rover 75?
Also i need a back rear passenger door, light green colour? And a power steering new pipe line,
And a screen washer container, as mine leaks. Any member have these or knows who does ?,

Rogue · 19th May 2021, 16:23

PCV filter kit

https://www.dmgrs.co.uk/products/rov...8236348e&_ss=r

Lee T · 19th May 2021, 16:28

Mickyboy or Trikey are my usual ports of call.

clf · 19th May 2021, 16:39

Quote:

Originally Posted by garyiryna

Can anyone help , i need a PCV FILTER, for Rover 75?
Also i need a back rear passenger door, light green colour? And a power steering new pipe line,
And a screen washer container, as mine leaks. Any member have these or knows who does ?,

The PCV and other consumables are available everywhere. DMGRS stock good brands and proven stock.

The PAS pipework may be an issue. Some sections are not available new, and some sections are prone to failure, try one of the traders (I got the pipe I needed from Mickboy very quickly, and he checked it over to be sure it was good. Other traders here will do the same thing). If you have difficulty, a hydraulic pipe supplier may be the best alternative (the type that supply and service building site plant).

When you come to replace, confirm it is not rubbing on anything. (it may also be the pump seals or the steering rack itself - just check where it is leaking from).

The washer bottle may simply be the seal for a washer pump, or the neck not seated properly. I would advise, if you havent already, to check these first.

Quote:

Originally Posted by Lee T

Mickyboy or Trikey are my usual ports of call.

lol, was just about to post this too.

Lee T · 19th May 2021, 19:30

Quote:

Originally Posted by clf

lol, was just about to post this too.

Literally pipped at the post eh

macafee2 · 19th May 2021, 20:11

If you cannot buy the power steering pipe see if there is a company near you that can make you a pipe using your old one as a pattern.

macafee2

Kearton · 19th May 2021, 20:52

Regarding the PCV filter, another option is to buy the BMW replacement part. It uses a lot of baffles to separate the oil from the vapour then return it to the engine. It doesn't use filters, so there is nothing to get blocked or need replacing.

I've had one in my engine since the first filter needed replacing.

Sorry, I don't know the part no.. It pays for itself after a few replacement cycles (or did when I got mine).

19th May 2021, 16:10	#1
garyiryna Newbie Rover 75 saloon Join Date: May 2010 Location: Cambridge Posts: 28 Thanks: 0 Thanked 0 Times in 0 Posts	Filters for Rover 75 PCV and other parts urgently needed Can anyone help , i need a PCV FILTER, for Rover 75? Also i need a back rear passenger door, light green colour? And a power steering new pipe line, And a screen washer container, as mine leaks. Any member have these or knows who does ?,

19th May 2021, 16:23	#2
Rogue I really should get out more....... 75 CDT SE 160 Saloon Join Date: May 2017 Location: Thorpe St Andrew, Norwich Posts: 2,645 Thanks: 1,386 Thanked 1,096 Times in 774 Posts	PCV filter kit https://www.dmgrs.co.uk/products/rov...8236348e&_ss=r __________________ Glutton for punishment --- Previously ... 2.6 SD1 x 2, 3.5 SD1, 820S, 820Si x2, 216 Gsi, 220T saloon, 414, 45 1.4 x2 and now a Cowley 75 CDT

19th May 2021, 16:28	#3
Lee T Gets stuck in MG ZT Join Date: Jul 2014 Location: Liverpool Posts: 850 Thanks: 180 Thanked 248 Times in 189 Posts	Mickyboy or Trikey are my usual ports of call. __________________ [SIGPIC][/SIGPIC]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

19th May 2021, 20:11	#6
macafee2 This is my second home Rover 75 Saloon & Tourer Join Date: Sep 2012 Location: Lincoln Posts: 14,912 Thanks: 1,630 Thanked 3,032 Times in 2,181 Posts	If you cannot buy the power steering pipe see if there is a company near you that can make you a pipe using your old one as a pattern. macafee2

19th May 2021, 20:52	#7
Kearton Gets stuck in MG ZT-T CDTi Join Date: Jul 2007 Location: Sunny Suffolk Posts: 617 Thanks: 1 Thanked 16 Times in 13 Posts	Regarding the PCV filter, another option is to buy the BMW replacement part. It uses a lot of baffles to separate the oil from the vapour then return it to the engine. It doesn't use filters, so there is nothing to get blocked or need replacing. I've had one in my engine since the first filter needed replacing. Sorry, I don't know the part no.. It pays for itself after a few replacement cycles (or did when I got mine).