|
||
|
3rd January 2018, 18:46 | #1 |
This is my second home
Small Join Date: Feb 2010
Location: Land of the Eel
Posts: 6,315
Thanks: 2,328
Thanked 2,991 Times in 1,431 Posts
|
Gear Selection issues
Hi
Not for me but for a fellow member and neighbour (Harry the Bird) who struggles to find his way around the forum.. Car is 2004 75 Conny diesel Manual Problem selecting reverse and second all other gears select and drives OK in those gears. problem started Sunday and is getting worse. The car has recently had a clutch and slave fitted and has been no problem in the month or so since they were done until now. Any ideas Ta Ian |
4th January 2018, 09:12 | #2 |
Posted a thing or two
Rover 75 CDTi Classic saloon, MGB GT, Skoda Yeti Join Date: Aug 2008
Location: Ramsey, Cambs
Posts: 1,874
Thanks: 626
Thanked 635 Times in 430 Posts
|
Probably first things to check are the clutch MC fluid level, and look for signs of any leaks at the master cylinder (fluid above pedal) or slave cylinder (fluid at bottom of bell housing). A bleed through of the clutch hydraulics may be a good idea to see if that improves things. Do you know what make of clutch and slave cylinder were fitted, and whether the system was bled after the clutch change ? Where is the bite point on the clutch pedal ?
Also, check the gear selector cables have been correctly refitted after the clutch change, with the outer cables firmly in the slots on the support brackets, and spring clips properly in place. Pete |
4th January 2018, 18:51 | #3 |
Avid contributor
Rover 75 Saloon Join Date: Feb 2012
Location: Rotherham
Posts: 232
Thanks: 107
Thanked 73 Times in 46 Posts
|
He should take the car back to whoever changed the clutch and slave - the problem is bound to be the result of that work.
|
4th January 2018, 20:29 | #4 |
This is my second home
Rover 75 saloon x2, Rover 75 Tourer x2, Rover 220 Coupe Turbo Join Date: Aug 2010
Location: Kirkcaldy, Fife
Posts: 9,036
Thanks: 2,278
Thanked 2,852 Times in 1,718 Posts
|
If reverse and 2nd gear are affected, it sounds like it could be the gear selector has broken.
__________________
Wanted - Indian bride. Cash waiting. (All sorted - bargain) First name and forum name: Ravinder Rover 75 2.0 CDT Connoisseur SE 116 (160 remap) Royal Blue (JFM) This vehicle was the 50,481st 75 to run off the production line, out of 112,381 This vehicle was the 2,238th 75 CDT Connoisseur SE to be made out of 3,775 This vehicle was the 5,002nd 75 in Royal Blue (code: JFM) to be made out of 14,420 Royal Blue 75s |
5th January 2018, 21:49 | #5 |
This is my second home
Small Join Date: Feb 2010
Location: Land of the Eel
Posts: 6,315
Thanks: 2,328
Thanked 2,991 Times in 1,431 Posts
|
Hi
Just an update, it's been checked today and looks to be a selector cable problem.. only £91.46 plus fitting. Thanks for the advice. Cheers Ian |
6th January 2018, 01:12 | #6 |
This is my second home
Rover 75 saloon x2, Rover 75 Tourer x2, Rover 220 Coupe Turbo Join Date: Aug 2010
Location: Kirkcaldy, Fife
Posts: 9,036
Thanks: 2,278
Thanked 2,852 Times in 1,718 Posts
|
Should of got one from the scrappys Ian...
__________________
Wanted - Indian bride. Cash waiting. (All sorted - bargain) First name and forum name: Ravinder Rover 75 2.0 CDT Connoisseur SE 116 (160 remap) Royal Blue (JFM) This vehicle was the 50,481st 75 to run off the production line, out of 112,381 This vehicle was the 2,238th 75 CDT Connoisseur SE to be made out of 3,775 This vehicle was the 5,002nd 75 in Royal Blue (code: JFM) to be made out of 14,420 Royal Blue 75s |
8th January 2018, 19:59 | #7 |
This is my second home
Small Join Date: Feb 2010
Location: Land of the Eel
Posts: 6,315
Thanks: 2,328
Thanked 2,991 Times in 1,431 Posts
|
It's not for me Rav so I'll leave it to the owner to decide what he wants to fit..
If it were mine I would always fit new when still available. Can never understand why any one would fit a mechanical part that may already have covered 100k. But maybe that's just me being fussy. Cheers Ian and sorry for the late reply. |
Thread Tools | |
Display Modes | |
|
|