|
||
|
3rd February 2016, 16:22 | #1 |
Regular poster
MG ZT Join Date: Jan 2016
Location: Thatcham
Posts: 50
Thanks: 17
Thanked 18 Times in 6 Posts
|
Facelift headlight washer jet connector
Hello I need one of these;
As far as I know only the facelift cars had them to connect the headlight washer jets to the hoses, the others had a right angle connector on the jet itself. Please PM me if you can help. Thanks, Paul. Last edited by Buccaneer; 5th February 2016 at 15:25.. |
3rd February 2016, 18:23 | #2 |
This is my second home
none but not gone Join Date: Mar 2013
Location: March, Cambs
Posts: 16,437
Thanks: 894
Thanked 4,247 Times in 3,025 Posts
|
Looks like the same one connects the hose to the pump at the other end
__________________
[SIGPIC][/SIGPIC]….All praise Bananaswan…. |
4th February 2016, 09:18 | #3 |
Regular poster
MG ZT Join Date: Jan 2016
Location: Thatcham
Posts: 50
Thanks: 17
Thanked 18 Times in 6 Posts
|
Thanks. Would the earlier car have one on the pump end of the pipe then?
|
4th February 2016, 10:47 | #4 |
This is my second home
none but not gone Join Date: Mar 2013
Location: March, Cambs
Posts: 16,437
Thanks: 894
Thanked 4,247 Times in 3,025 Posts
|
Possibly yes
__________________
[SIGPIC][/SIGPIC]….All praise Bananaswan…. |
4th February 2016, 10:57 | #5 |
This is my second home
fiat panda Join Date: Sep 2009
Location: haverhill
Posts: 6,720
Thanks: 96
Thanked 586 Times in 526 Posts
|
i can confirm after looking at a spare hose the following.the connector on the pump end is angled plus the end two connectors on the hose at the jet end only the inner jets out of the four on the early are in fact straight
__________________
fiat panda 1.2 eco |
4th February 2016, 18:04 | #6 |
Regular poster
MG ZT Join Date: Jan 2016
Location: Thatcham
Posts: 50
Thanks: 17
Thanked 18 Times in 6 Posts
|
Thanks for the info. As the part is VDO possibly on some other vehicles as well. Just need to find a breaker now!
|
5th February 2016, 18:37 | #7 | |
Loves to post
Rover 75 2.5 V6 Connoisseur Join Date: Aug 2015
Location: Clavering. Essex
Posts: 499
Thanks: 120
Thanked 96 Times in 77 Posts
|
Quote:
Do you need the little plastic clip as well or just the connector? Last edited by 129c; 5th February 2016 at 18:44.. |
|
5th February 2016, 19:56 | #8 |
Regular poster
MG ZT Join Date: Jan 2016
Location: Thatcham
Posts: 50
Thanks: 17
Thanked 18 Times in 6 Posts
|
Connector and clip please. Please PM me with your address and price.
Thanks, Paul. Last edited by Buccaneer; 5th February 2016 at 20:00.. |
5th February 2016, 23:21 | #9 |
Loves to post
Rover 75 2.5 V6 Connoisseur Join Date: Aug 2015
Location: Clavering. Essex
Posts: 499
Thanks: 120
Thanked 96 Times in 77 Posts
|
Are you needing one of these to join the pipe to the pump?
The reason I have one is because they leak so I connected the pipe directly to the pump using a jubilee clip instead. You are welcome to the thing but I would seriously do what I did instead. Let me know mate. |
6th February 2016, 09:15 | #10 |
Regular poster
MG ZT Join Date: Jan 2016
Location: Thatcham
Posts: 50
Thanks: 17
Thanked 18 Times in 6 Posts
|
I need to connect the washer jet to the end of the hose. It has the 90 degree fitting in the pic. This is the good one the other one got broken in accident. (see " Do you know this ZT" thread in the general forum)
I need the 90 degree bend to make the connection between the jet and hose. If it leaks I will put some hose clips on the 90 degree connector. Thanks for your kind offer. I'll PM you my address. |
Thread Tools | |
Display Modes | |
|
|