pleum help

carnut · 14th June 2018, 07:24

Only just got a 75 cdti and well please with it but worried over plenum drain holes and need a pollen filter fitting is there any one around Cheshire area who can look at this for me will see them right for there time as my health restricts what I can do , Cheers Ron

Mike Trident · 14th June 2018, 09:05

Hi, and welcome!

Unfortunately, I am too far away to come and do it for you. I am sure someone will help you out.

It's far simpler than it sounds if you are able to have a go yourself.

Rogue · 14th June 2018, 09:30

Greetings... As already mentioned there is probably someone close to you that could lend a hand but it is a straightforward job... Have a watch of this video and you should be good to go ...

https://www.the75andztclub.co.uk/for...&postcount=360

carnut · 14th June 2018, 09:55

Thanks for that guys but couple of years ago I been up for job my self , Now I sorry to say the Big C has got me I lack the energy and some times the will to do things

Mike Trident · 14th June 2018, 10:02

Sorry to hear that mate, Like I said someone will help you out for sure.

And the video!!!!! it would help if they were speaking English lol

Good Vid tho.

Nick Greg · 14th June 2018, 10:20

I do wish, when someone asks for help, i.e. someone to do the job for them that the question would be answered as such. There are many of us who are unable, unwilling or unsure how to do any of these supposedly "simple jobs" and telling us its dead easy is not addressing the problem. Read the question properly folks.

Arctic · 14th June 2018, 10:26

HI Ronald
This will give you all the information you need about the plenum, have a good read of it and when a good member comes forward you will both know what you are dealing with, if at any time you would like to have a drive out you are more than welcome to come to our midland nano meet.

At the meet you can have your car given the once over for all and any other little mods that need doing FOC cheers Arctic

https://the75andztclub.co.uk/forum/s...d.php?t=125864

link below by my signature, for the meet.

Rogue · 14th June 2018, 10:41

Quote:

Originally Posted by Nick Greg

I do wish, when someone asks for help, i.e. someone to do the job for them that the question would be answered as such. There are many of us who are unable, unwilling or unsure how to do any of these supposedly "simple jobs" and telling us its dead easy is not addressing the problem. Read the question properly folks.

Sometimes people think a job is more difficult than it really is and a little advice and info is all they actually need.

carnut · 14th June 2018, 12:06

Thanks Arctic will see if im up to going and weather ok Cheers Ron

macafee2 · 15th June 2018, 12:13

in two weeks I will be near Pasley Hay, about 35-40 miles from you.
If you want to pop over I'll have a look for you.

pm me within the next week if interested

macafee2

14th June 2018, 07:24	#1
carnut Regular poster rover 75 saloon Join Date: Jun 2018 Location: middlewich Posts: 79 Thanks: 48 Thanked 18 Times in 15 Posts	pleum help Only just got a 75 cdti and well please with it but worried over plenum drain holes and need a pollen filter fitting is there any one around Cheshire area who can look at this for me will see them right for there time as my health restricts what I can do , Cheers Ron Last edited by carnut; 14th June 2018 at 07:28..

14th June 2018, 09:05	#2
Mike Trident Posted a thing or two Rover 75 CDTi Saloon & Citroen C1 Join Date: Jun 2016 Location: Oakenshaw, Near Bradford Posts: 1,622 Thanks: 385 Thanked 552 Times in 328 Posts	Hi, and welcome! Unfortunately, I am too far away to come and do it for you. I am sure someone will help you out. It's far simpler than it sounds if you are able to have a go yourself. __________________ Rover 75 2.0 CDTi (131Ps) Conn SE Saloon. (Manual) 160 Remap, cruise control, electric window blind, temp gauge, Real walnut / ZT interior, FBH with GSM control. BORN Tuesday, 5th October 2004 @ 12:35:52 This vehicle was the 104,679th 75 to run off the production line, out of 112,381 This vehicle was the 3,318th 75 CDT Connoisseur SE (135) to be made out of 4,744 This vehicle was the 12,440th 75 in Starlight Silver (code: MBB) to be made out of 14,280 Starlight Silver 75s

14th June 2018, 09:30	#3
Rogue I really should get out more....... 75 CDT SE 160 Saloon Join Date: May 2017 Location: Thorpe St Andrew, Norwich Posts: 2,654 Thanks: 1,386 Thanked 1,096 Times in 774 Posts	Greetings... As already mentioned there is probably someone close to you that could lend a hand but it is a straightforward job... Have a watch of this video and you should be good to go ... https://www.the75andztclub.co.uk/for...&postcount=360 __________________ Glutton for punishment --- Previously ... 2.6 SD1 x 2, 3.5 SD1, 820S, 820Si x2, 216 Gsi, 220T saloon, 414, 45 1.4 x2 and now a Cowley 75 CDT

14th June 2018, 09:55	#4
carnut Regular poster rover 75 saloon Join Date: Jun 2018 Location: middlewich Posts: 79 Thanks: 48 Thanked 18 Times in 15 Posts	plenum Thanks for that guys but couple of years ago I been up for job my self , Now I sorry to say the Big C has got me I lack the energy and some times the will to do things

14th June 2018, 10:02	#5
Mike Trident Posted a thing or two Rover 75 CDTi Saloon & Citroen C1 Join Date: Jun 2016 Location: Oakenshaw, Near Bradford Posts: 1,622 Thanks: 385 Thanked 552 Times in 328 Posts	Sorry to hear that mate, Like I said someone will help you out for sure. And the video!!!!! it would help if they were speaking English lol Good Vid tho. __________________ Rover 75 2.0 CDTi (131Ps) Conn SE Saloon. (Manual) 160 Remap, cruise control, electric window blind, temp gauge, Real walnut / ZT interior, FBH with GSM control. BORN Tuesday, 5th October 2004 @ 12:35:52 This vehicle was the 104,679th 75 to run off the production line, out of 112,381 This vehicle was the 3,318th 75 CDT Connoisseur SE (135) to be made out of 4,744 This vehicle was the 12,440th 75 in Starlight Silver (code: MBB) to be made out of 14,280 Starlight Silver 75s

14th June 2018, 10:20	#6
Nick Greg Posted a thing or two Honda Insight Hybrid Join Date: May 2015 Location: Brighouse Posts: 1,157 Thanks: 691 Thanked 424 Times in 280 Posts	I do wish, when someone asks for help, i.e. someone to do the job for them that the question would be answered as such. There are many of us who are unable, unwilling or unsure how to do any of these supposedly "simple jobs" and telling us its dead easy is not addressing the problem. Read the question properly folks.

14th June 2018, 10:26	#7
Arctic Give to Learn Freelander 2 Join Date: Aug 2010 Location: West Midlands Posts: 18,717 Thanks: 1,155 Thanked 6,407 Times in 3,874 Posts	HI Ronald This will give you all the information you need about the plenum, have a good read of it and when a good member comes forward you will both know what you are dealing with, if at any time you would like to have a drive out you are more than welcome to come to our midland nano meet. At the meet you can have your car given the once over for all and any other little mods that need doing FOC cheers Arctic https://the75andztclub.co.uk/forum/s...d.php?t=125864 link below by my signature, for the meet. __________________ Arctic Givology Learn to Give Everything is Achievable ad altiora tendo. Check out our Nano meet dates http://www.midlandsnanomeets.co.uk/ http://www.the75andztclub.co.uk/index.php?thepage=howto " You do the work , we supply the expertise "

14th June 2018, 12:06	#9
carnut Regular poster rover 75 saloon Join Date: Jun 2018 Location: middlewich Posts: 79 Thanks: 48 Thanked 18 Times in 15 Posts	plenum Thanks Arctic will see if im up to going and weather ok Cheers Ron

15th June 2018, 12:13	#10
macafee2 This is my second home Rover 75 Saloon & Tourer Join Date: Sep 2012 Location: Lincoln Posts: 14,929 Thanks: 1,630 Thanked 3,032 Times in 2,181 Posts	in two weeks I will be near Pasley Hay, about 35-40 miles from you. If you want to pop over I'll have a look for you. pm me within the next week if interested macafee2