Radio Wiring loom

[RoverSE]

Hi

New to the forum and wondering if anyone could help!!

I would really appreciate it if someone could identify the following coloured wires for me from my audio loom:

1 - Green/Grey
2 - Red/Green
3 - Blank
4 - Purple/Pink (Thicker cable)
5 - Purple/Yellow
6 - Red/White
7 - Green/Yellow (Thicker cable)
8 - Black

TIA
G

[Duotone]

Originally Posted by RoverSE

Hi

New to the forum and wondering if anyone could help!!

I would really appreciate it if someone could identify the following coloured wires for me from my audio loom:

1 - Green/Grey
2 - Red/Green
3 - Blank
4 - Purple/Pink (Thicker cable)
5 - Purple/Yellow
6 - Red/White
7 - Green/Yellow (Thicker cable)
8 - Black

TIA
G

We need a bit more to go on..

What type of plug and where does it go ?

Meanwhile have a look at this.

This is for for ISO connectors



Dave T

[RoverSE]

Originally Posted by Duotone

We need a bit more to go on..

What type of plug and where does it go ?

Meanwhile have a look at this.

This is for for ISO connectors



Dave T

Thanks for the diagram I have seen this but in my grey block my coloured wired are different as per my original post?

What I'm trying to do is identify the switch and permanent live cable as I keep loosing my pre-set radio stations (Sony aftermarket H/U).

Thanks again

[suffolk boy]

the head unit should have two wires one marked live in the back before it gets to the connector of the cars loom.thse are normally of the bullet type the other wire nxt to it will be a switched live swop them over

[Duotone]

Ignition live is Light green/ White

+12 v Permanent live is Purple/Pink

Dave T

[RoverSE]

Originally Posted by Duotone

Ignition live is Light green/ White

+12 v Permanent live is Purple/Pink

Dave T

Thanks Dave all sorted!!