|
||
|
1st March 2019, 08:54 | #1 |
Newbie
Rover 75 2.5 V6 Saloon Spectre Join Date: Feb 2019
Location: Holten
Posts: 18
Thanks: 5
Thanked 2 Times in 2 Posts
|
Metall housing thermostat K series V6
Dear members,
I see on several threads remarks about a metall housing of the thermostat for the K series V6. Is this a usefull modification? Who has good/bad experiences with it? I read that the plastic housing often cracks. Where can I get these housing? Thnx! |
1st March 2019, 12:03 | #2 |
same car since 2005
2001 Rover 75 2.0 v6 Connoisseur Saloon Join Date: Nov 2006
Location: Ellesmere Port , Cheshire
Posts: 3,811
Thanks: 379
Thanked 549 Times in 466 Posts
|
Have a look at this thread ….
https://the75andztclub.co.uk/forum/s...housing&page=8 Post #75 is where it gets interesting ! They are made by member Kaiser in South Africa and there are many posts on here about them
__________________
Who said it was simples ? |
1st March 2019, 12:16 | #3 | |
Newbie
Rover 75 2.5 V6 Saloon Spectre Join Date: Feb 2019
Location: Holten
Posts: 18
Thanks: 5
Thanked 2 Times in 2 Posts
|
metall housing Thermostat
Quote:
Thnx, first impression is that it looks like a very good modification. I also see a (similar?) solution on the website from Roverkseries, anyone familiar with this one? It will take the weekend to explore this tread |
|
1st March 2019, 22:39 | #4 |
Gets stuck in
MG ZT,MG ZT-T Join Date: May 2008
Location: St. Helens
Posts: 961
Thanks: 211
Thanked 235 Times in 158 Posts
|
Hi Rob,
I have 2 V6`s and have fitted (had fitted) 1 to each car and have no problems so far! I had to replace 2 plastic thermostats on one of my cars due to the plastic splitting Nothing to do with "O" rings or clips in the wrong position!! So yes I would recommend them. Neil |
|
|