Wanted: ZTT 1.8T Turbo Boost Valve - Page 2

JohnDotCom · 23rd August 2008, 21:46

Rimmers for quick, efficient service (they do mail order) http://www.rimmerbros.co.uk/

or any XPart Parts Dealer.

http://www.xpartautoservicecentre.co...341cc2a,,.aspx

Click on service centres then select Parts to find your nearest outlet.

Greeners · 23rd August 2008, 22:03

click on this and put the part number in.

HTH

JohnDotCom · 23rd August 2008, 22:17

Oh Come on Greeners, that is far to simple.

Greeners · 24th August 2008, 08:35

Quote:

Originally Posted by JohnDotCom

Oh Come on Greeners, that is far to simple.

What, me or the link...?

JohnDotCom · 24th August 2008, 08:57

Quote:

Originally Posted by Greeners

What, me or the link...?

Putting in the Direct link!

daddyrob · 27th August 2008, 17:34

Thanks guys - much appreciated, as usual !

Rob

daddyrob · 1st September 2008, 14:52

Just thought you might like to know that I've sorted my 'sudden thump' under hard acceleration on the ZTT. It was simple in the end - one of the hoses that comes from the wastegate control valve that fits onto the turbo unit wasn't actually connected ! Now it's back on it's sweet as a nut - and didn't cost me anything ! The connector that was flapping around unconnected is a bit oil damaged so I'll try and get hold of another one but many thanks to all who have helped me solve this annoying problem.
Rob

Arthur Quantize · 5th September 2008, 13:53

Interesting - I must take a look at mine when it stops raining in case it's a quick fix, and have a look on the diagrams to see if I can figure out where it is of course!

Arthur Quantize · 24th September 2008, 19:06

Unfortunately not - everything is connected up as it should be, so it looks like a new boost pressure valve for me

23rd August 2008, 22:03	#12
Greeners Moderator MG-ZTT Join Date: Mar 2007 Location: Ware, Herts Posts: 19,798 Thanks: 161 Thanked 1,249 Times in 1,036 Posts	click on this and put the part number in. HTH __________________ *David* Impecunity is the mother of ingenuity Useful how to's for common problems Car Of The Month Jan 2014 [SatNav Power Down] [Coolant Level] [SatNav Repair] [Diesel Non Starting] [Paint Codes] [Rear Light Seals] [Reversing Light Switch] [Bleeding Brakes][Sunroof Drain] [Early ZT's][Instrument Pack Diagnostics][ATC Diagnostics]

23rd August 2008, 21:46	#11
JohnDotCom * Rover 75 FaceLift Tourer CDTi 170BHP Auto ConnSE 2005 Model Starlight Silver Join Date: Nov 2006 Location: Abergele Posts: 28,735 Thanks: 0 Thanked 6 Times in 5 Posts	Rimmers for quick, efficient service (they do mail order) http://www.rimmerbros.co.uk/ or any XPart Parts Dealer. http://www.xpartautoservicecentre.co...341cc2a,,.aspx Click on service centres then select Parts to find your nearest outlet.

23rd August 2008, 22:17	#13
JohnDotCom * Rover 75 FaceLift Tourer CDTi 170BHP Auto ConnSE 2005 Model Starlight Silver Join Date: Nov 2006 Location: Abergele Posts: 28,735 Thanks: 0 Thanked 6 Times in 5 Posts	Oh Come on Greeners, that is far to simple.

27th August 2008, 17:34	#16
daddyrob Newbie ZTT Join Date: Aug 2008 Posts: 9 Thanks: 0 Thanked 0 Times in 0 Posts	Thanks guys - much appreciated, as usual ! Rob

1st September 2008, 14:52	#17
daddyrob Newbie ZTT Join Date: Aug 2008 Posts: 9 Thanks: 0 Thanked 0 Times in 0 Posts	Just thought you might like to know that I've sorted my 'sudden thump' under hard acceleration on the ZTT. It was simple in the end - one of the hoses that comes from the wastegate control valve that fits onto the turbo unit wasn't actually connected ! Now it's back on it's sweet as a nut - and didn't cost me anything ! The connector that was flapping around unconnected is a bit oil damaged so I'll try and get hold of another one but many thanks to all who have helped me solve this annoying problem. Rob

5th September 2008, 13:53	#18
Arthur Quantize Loves to post MY poor Rover is dead... Join Date: Oct 2007 Location: Halifax Posts: 339 Thanks: 0 Thanked 0 Times in 0 Posts	Interesting - I must take a look at mine when it stops raining in case it's a quick fix, and have a look on the diagrams to see if I can figure out where it is of course!

24th September 2008, 19:06	#19
Arthur Quantize Loves to post MY poor Rover is dead... Join Date: Oct 2007 Location: Halifax Posts: 339 Thanks: 0 Thanked 0 Times in 0 Posts	Unfortunately not - everything is connected up as it should be, so it looks like a new boost pressure valve for me