|
||
|
15th June 2017, 11:56 | #1 |
Regular poster
ROVER 75 SALOON Join Date: May 2013
Location: NORTHAMPTON
Posts: 70
Thanks: 3
Thanked 6 Times in 2 Posts
|
Amp and Speaker Wiring
Good afternoon,I replaced my head unit for a Kenwood some time ago all wired in with adaptors no wire cutting which was nice (no scotch blocks) I have also wired in an active sub of the Vibe variety.Now its time to upgrade the front components and the rear fit some coaxials.I have decided to go the JBL route with speakers with a 4 channel amp (not decided yet)I need to know the following:i know i will have to disconnect the ISO speaker connector from the adaptor(i wont be using any sound from the head unit amp) but can i then wire in 8 wires(front and back + and - from the amps speaker outputs to the cars ISO speaker connector ensuring existing speaker cables can be used. I'm planning on placing the amp behind the aircon controls(easy to wire up) and use high quality phono leads from head unit to amp.If anyone can help me with amp to speaker ISO issue or any feedback on my plans please let me know.
Cheers Chas |
|
|