|
||
|
17th May 2020, 20:51 | #1 |
Posted a thing or two
2004 mk1 Rover 75 1.8T Club SE saloon (auto) Join Date: Jul 2013
Location: Enniskillen
Posts: 1,307
Thanks: 670
Thanked 254 Times in 222 Posts
|
Part number for this clip?
Anyone know what the part number for this plastic clip is?
It lives in the right-rear wheel arch (on one of the body-mounted steel studs) and holds a 9/10mm pipe (near the fuel filler neck) that goes between the EVAP tank and the charcoal canister. There are two of these clips, but one of mine is split Suppose I could use some plastic P clips instead.. Separately, and having seen a few others encounter difficulty removing the 5 nuts from the steel shield (for EVAP pipes) in the right-rear wheel arch, I've got some M6 plastic nuts that I plan on fitting the shield with instead (these could be cut off if needed, but at least they shouldn't ever shear the body studs when being removed in future). Thankfully, I got all the original nuts off without breaking anything - wish I could say the same for the frankly rubbish brackets that hold the EVAP tank in place Had to fabricate (and I use the term loosely!) some replacement brackets and pop rivet them in place + seam sealer etc. Cheers, Karl. |
|
|