|
||
|
17th September 2019, 17:59 | #1 |
Regular poster
MG ZT-T CDTi Auto Join Date: Nov 2014
Location: Rotterdam
Posts: 31
Thanks: 4
Thanked 3 Times in 3 Posts
|
190 Caliper carriers
Hello people !
I've managed to get my hand on a set of BMW 330i front calipers and carriers to fit as an upgrade on my ZT-T Diesel. Obviously I bought new 325mm discs and pads too! The calipers came from a Dutch scrapyard BMW 330i, but I'm guessing they came from 2 different cars since the mounting holes for the carriers are different! Both calipers have got the 844 and 57/25 number in it, and they are indeed a LH and a RH one, but as you can see in the picture, the mounting holes are different! One has got the number 570 stamped in it (Which I suspect to be the correct one), the other has got the number 720 stamped in it. The calipers fit to either one of them and so do the pads. Does anyone know which one is the correct one (570 or 720?) so I can go and look to fond the other one ? Maybe someone has a set lying around and want to have a look for the stamped number ? Thanks in advance guys ! Greetz from Holland! |
17th September 2019, 21:11 | #2 |
This is my second home
MG ZT CDTi Join Date: Jan 2014
Location: carrick
Posts: 7,859
Thanks: 3,494
Thanked 2,657 Times in 1,973 Posts
|
Quote:
Calipers will be fine, but you will need the MG ZT 190 or 260 carriers. Try them to confirm.
__________________
It is not gloss primer .............. it is duct tape silver! |
17th September 2019, 21:18 | #3 |
Premium Trader
Rover 75 Join Date: Nov 2010
Location: Devon
Posts: 33,766
Thanks: 8,837
Thanked 14,831 Times in 8,030 Posts
|
Send Gordy a PM, he can bring them to Boxtel for you on Sunday!
https://the75andztclub.co.uk/forum/s...d.php?t=299051
__________________
Lest we forget..
|
18th September 2019, 10:36 | #4 | |
Regular poster
MG ZT-T CDTi Auto Join Date: Nov 2014
Location: Rotterdam
Posts: 31
Thanks: 4
Thanked 3 Times in 3 Posts
|
Quote:
So.. now the task of finding one 570 carrier |
|
18th September 2019, 11:50 | #5 | |
This is my second home
MG ZT CDTi Join Date: Jan 2014
Location: carrick
Posts: 7,859
Thanks: 3,494
Thanked 2,657 Times in 1,973 Posts
|
Quote:
I dont think any bmw carriers fit . Only the calipers. I would like to view the post you are referring to. Sent from my SM-A600FN using Tapatalk
__________________
It is not gloss primer .............. it is duct tape silver! |
|
18th September 2019, 12:04 | #6 |
Regular poster
MG ZT-T CDTi Auto Join Date: Nov 2014
Location: Rotterdam
Posts: 31
Thanks: 4
Thanked 3 Times in 3 Posts
|
|
18th September 2019, 12:14 | #7 | |
This is my second home
MG ZT CDTi Join Date: Jan 2014
Location: carrick
Posts: 7,859
Thanks: 3,494
Thanked 2,657 Times in 1,973 Posts
|
Quote:
The general consensus til then was no. But if it has been done successfully then they must fit. In that thread it does specify which model from which to use. But since you have two different ones, I would offer up to your hub to verify which you needed to visually assist in a scrap yard search. Sent from my SM-A600FN using Tapatalk
__________________
It is not gloss primer .............. it is duct tape silver! |
|
|
|