I know this isn't quite PC but!

marrky · 16th April 2007, 15:27

Hopefully you will forgive me for putting this here and if you have seen it already/somewhere else, but this blew me away!
A flat 100cc 12 cylinder!!!!!!!!!!!!!!!!
http://www.youtube.com/watch?v=vxYRa0pqxlw
Hope the link works

davediamond · 16th April 2007, 15:39

Wow

Thats pretty impressive. If he builds a 'Shrink Ray' next I volunteer to be a test driver.

lol

Dave

Paranoid Carlos · 16th April 2007, 16:02

Seen him before, what patience he must have.......

Paranoid Carlos · 16th April 2007, 16:06

In a different vien but...........24 chainsaw engines

http://youtube.com/watch?v=DDWqJe1dCgY

http://youtube.com/watch?v=_5ruRHNfp...elated&search=

Got to admire the engineering on it.

baxlin · 16th April 2007, 16:28

And I thought Allan Millward, building 9 cyl Kawasakis was mad! He also did a 7cyl - using the cylinder blocks from 2 twins and a triple. Unlike this 24 engined monster, Allan built his own crankcase and innards to take the multiple cylinder barrels, so it was a proper engine, mounted in the bike frame, and road registered to boot.

Imagine the timing on the 7 cylinder!!

He was on the M/cycle Mechanics Magazine stand at a couple of shows I went to a few years ago, building them up from scratch (apart from the c/case, as he wasn't allowed to weld/braze in the show!)

Paranoid Carlos · 16th April 2007, 16:38

Quote:

Originally Posted by baxlin

And I thought Allan Millward, building 9 cyl Kawasakis was mad! He also did a 7cyl - using the cylinder blocks from 2 twins and a triple. Unlike this 24 engined monster, Allan built his own crankcase and innards to take the multiple cylinder barrels, so it was a proper engine, mounted in the bike frame, and road registered to boot.

Imagine the timing on the 7 cylinder!!

He was on the M/cycle Mechanics Magazine stand at a couple of shows I went to a few years ago, building them up from scratch (apart from the c/case, as he wasn't allowed to weld/braze in the show!)

That fella's bonkers, there was a 9 cylinder z1300 knocking around as well

GreyGhost · 16th April 2007, 16:53

If nobody minds I will put this in the Social forum, only because it's not a 75 or a ZT, unless of course he wants to build one of those too.

Paranoid Carlos · 16th April 2007, 17:06

Thought it should be, but only almighty ones can do this.......

16th April 2007, 15:27	#1
marrky Regular poster ZT Join Date: Jan 2007 Location: CHELMSFORD Posts: 77 Thanks: 0 Thanked 0 Times in 0 Posts	I know this isn't quite PC but! Hopefully you will forgive me for putting this here and if you have seen it already/somewhere else, but this blew me away! A flat 100cc 12 cylinder!!!!!!!!!!!!!!!! http://www.youtube.com/watch?v=vxYRa0pqxlw Hope the link works

16th April 2007, 15:39	#2
davediamond Loves to post Commission No. 001055 Join Date: Jan 2007 Location: South Wales (English) Posts: 440 Thanks: 0 Thanked 1 Time in 1 Post	Wow Thats pretty impressive. If he builds a 'Shrink Ray' next I volunteer to be a test driver. lol Dave __________________ [SIGPIC][/SIGPIC]

16th April 2007, 16:02	#3
Paranoid Carlos Posted a thing or two Starlight CDT Conn SE Join Date: Nov 2006 Location: Erdington, Birmingham Posts: 1,057 Thanks: 0 Thanked 0 Times in 0 Posts	Seen him before, what patience he must have....... __________________ [SIGPIC][/SIGPIC]

16th April 2007, 16:06	#4
Paranoid Carlos Posted a thing or two Starlight CDT Conn SE Join Date: Nov 2006 Location: Erdington, Birmingham Posts: 1,057 Thanks: 0 Thanked 0 Times in 0 Posts	In a different vien but...........24 chainsaw engines http://youtube.com/watch?v=DDWqJe1dCgY http://youtube.com/watch?v=_5ruRHNfp...elated&search= Got to admire the engineering on it. __________________ [SIGPIC][/SIGPIC]

16th April 2007, 17:06	#8
Paranoid Carlos Posted a thing or two Starlight CDT Conn SE Join Date: Nov 2006 Location: Erdington, Birmingham Posts: 1,057 Thanks: 0 Thanked 0 Times in 0 Posts	Thought it should be, but only almighty ones can do this....... __________________ [SIGPIC][/SIGPIC]

16th April 2007, 16:28	#5
baxlin This is my second home Volvo C70 Convertible and JZR 3 wheeler Join Date: Nov 2006 Location: Tring, Herts Posts: 3,960 Thanks: 124 Thanked 173 Times in 124 Posts	And I thought Allan Millward, building 9 cyl Kawasakis was mad! He also did a 7cyl - using the cylinder blocks from 2 twins and a triple. Unlike this 24 engined monster, Allan built his own crankcase and innards to take the multiple cylinder barrels, so it was a proper engine, mounted in the bike frame, and road registered to boot. Imagine the timing on the 7 cylinder!! He was on the M/cycle Mechanics Magazine stand at a couple of shows I went to a few years ago, building them up from scratch (apart from the c/case, as he wasn't allowed to weld/braze in the show!)

16th April 2007, 16:53	#7
GreyGhost Banned 180+ Sport Auto Join Date: Oct 2006 Location: Bedford Middle Level Posts: 17,787 Thanks: 0 Thanked 18 Times in 5 Posts	If nobody minds I will put this in the Social forum, only because it's not a 75 or a ZT, unless of course he wants to build one of those too.