Mechanics in Redcar area?

Avulon · 8th May 2022, 17:25

Anyone know of a decent trustworthy mech in the Redcar area to take a look at a leaking waterpump on a 1.8T? Might just be pipework but I'm not holding my breath or stripping it further to find out for myself. I just don't have the time or inclination. And don't have the cam locking tools either if it does need changing.

Avulon · 9th May 2022, 08:03

Quick update - it is the water pump that is leaking - a slow drip when cold - a moderate drip if the header tank cap is removed so highly unlikely the head gasket. It's coming down past the bottom pulley boss which would also limit the leak location. I've a fair idea how to do the job and now have my tools here (hurrah). If I could get someone else to do it before next weekend I'd still prefer that, otherwise I can see myself doing it starting Friday evening.
So again - anyone have a recommendation for a garage to undertake a cambelt, tensioner and water pump change on a 1.8T?

suzublu · 9th May 2022, 09:18

What you doing in Redcar?

Anyway Chris, there's a place top of Portrack Lane Stockton that used to be called Rovetec I think, or, Gary Nelson, round the corner from me

I'll PM you his number.

Avulon · 9th May 2022, 13:14

Many thanks Ronnie - I'll answer to your PM. and give Gary a call.

richw · 9th May 2022, 19:48

Hmm, Rovetech. I wish i dared to go there, as I work about five mins walk away.

However, I took my 25 there once and feel like I was taken advantage of. They charged beyond top dollar for a simple electrical fault. And then said I had HGF and that would be £750. Hmm!

I would appreciate if you could post back and let us know how you get on.

suzublu · 9th May 2022, 20:11

Quote:

Originally Posted by richw

Hmm, Rovetech. I wish i dared to go there, as I work about five mins walk away.

However, I took my 25 there once and feel like I was taken advantage of. They charged beyond top dollar for a simple electrical fault. And then said I had HGF and that would be £750. Hmm!

I would appreciate if you could post back and let us know how you get on.

I heard that too, but a member went recently and said they were ok?

Sent from my SM-A326B using Tapatalk

Avulon · 10th May 2022, 07:25

After further thought and a look at rovetech site, and how far I'd have to drive it to get round to Seaton I've taken the brave choice to DIY it and have ordered a full kit. Should be tackling this next Saturday weather permitting.

BRI · 10th May 2022, 10:50

I will only use northeast 4x4 Ross Road Stockton never had a problem in about 10 years all ex rover guys Only thing is they do get very busy

richw · 11th May 2022, 19:03

Cool, that is worth bearing in mind.

Ronnie, is Gary in Seaton? Could be handy.

suzublu · 11th May 2022, 19:05

Quote:

Originally Posted by richw

Cool, that is worth bearing in mind.

Ronnie, is Gary in Seaton? Could be handy.

Sort of, just over the border 😁 10 minutes walk from me 😎

Sent from my SM-A326B using Tapatalk

8th May 2022, 17:25	#1
Avulon This is my second home 1.8t Tourer Join Date: Oct 2011 Location: Tanelorn Posts: 4,830 Thanks: 956 Thanked 1,148 Times in 916 Posts	Mechanics in Redcar area? Anyone know of a decent trustworthy mech in the Redcar area to take a look at a leaking waterpump on a 1.8T? Might just be pipework but I'm not holding my breath or stripping it further to find out for myself. I just don't have the time or inclination. And don't have the cam locking tools either if it does need changing. __________________ Need a T4 ?: T4 Owners Map thanks to Stevestrat ( use at your own risk) Where?: https://en.wikipedia.org/wiki/Tanelorn Mods/Retrofits: PCV vortex 'filter'; bluetooth; inline thermostat; reversing sensors; plenum spyhole ; headlamp washers ; Diy mp3 player replacing CD multichanger; FBH with remote; Headlamp washers; black/chrome front grille, rear blind; Xenon projectors To do: puddle lights; 2 Din cd/nav to fit; boot release button

9th May 2022, 08:03	#2
Avulon This is my second home 1.8t Tourer Join Date: Oct 2011 Location: Tanelorn Posts: 4,830 Thanks: 956 Thanked 1,148 Times in 916 Posts	Quick update - it is the water pump that is leaking - a slow drip when cold - a moderate drip if the header tank cap is removed so highly unlikely the head gasket. It's coming down past the bottom pulley boss which would also limit the leak location. I've a fair idea how to do the job and now have my tools here (hurrah). If I could get someone else to do it before next weekend I'd still prefer that, otherwise I can see myself doing it starting Friday evening. So again - anyone have a recommendation for a garage to undertake a cambelt, tensioner and water pump change on a 1.8T? __________________ Need a T4 ?: T4 Owners Map thanks to Stevestrat ( use at your own risk) Where?: https://en.wikipedia.org/wiki/Tanelorn Mods/Retrofits: PCV vortex 'filter'; bluetooth; inline thermostat; reversing sensors; plenum spyhole ; headlamp washers ; Diy mp3 player replacing CD multichanger; FBH with remote; Headlamp washers; black/chrome front grille, rear blind; Xenon projectors To do: puddle lights; 2 Din cd/nav to fit; boot release button

9th May 2022, 13:14	#4
Avulon This is my second home 1.8t Tourer Join Date: Oct 2011 Location: Tanelorn Posts: 4,830 Thanks: 956 Thanked 1,148 Times in 916 Posts	Many thanks Ronnie - I'll answer to your PM. and give Gary a call. __________________ Need a T4 ?: T4 Owners Map thanks to Stevestrat ( use at your own risk) Where?: https://en.wikipedia.org/wiki/Tanelorn Mods/Retrofits: PCV vortex 'filter'; bluetooth; inline thermostat; reversing sensors; plenum spyhole ; headlamp washers ; Diy mp3 player replacing CD multichanger; FBH with remote; Headlamp washers; black/chrome front grille, rear blind; Xenon projectors To do: puddle lights; 2 Din cd/nav to fit; boot release button

10th May 2022, 07:25	#7
Avulon This is my second home 1.8t Tourer Join Date: Oct 2011 Location: Tanelorn Posts: 4,830 Thanks: 956 Thanked 1,148 Times in 916 Posts	After further thought and a look at rovetech site, and how far I'd have to drive it to get round to Seaton I've taken the brave choice to DIY it and have ordered a full kit. Should be tackling this next Saturday weather permitting. __________________ Need a T4 ?: T4 Owners Map thanks to Stevestrat ( use at your own risk) Where?: https://en.wikipedia.org/wiki/Tanelorn Mods/Retrofits: PCV vortex 'filter'; bluetooth; inline thermostat; reversing sensors; plenum spyhole ; headlamp washers ; Diy mp3 player replacing CD multichanger; FBH with remote; Headlamp washers; black/chrome front grille, rear blind; Xenon projectors To do: puddle lights; 2 Din cd/nav to fit; boot release button

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

9th May 2022, 09:18	#3
suzublu This is my second home rover 75 1.8 vvc club se wedgwood blue Join Date: Aug 2009 Location: Seaton Carew Posts: 26,905 Thanks: 65 Thanked 7,142 Times in 4,642 Posts	What you doing in Redcar? Anyway Chris, there's a place top of Portrack Lane Stockton that used to be called Rovetec I think, or, Gary Nelson, round the corner from me I'll PM you his number.

9th May 2022, 19:48	#5
richw Avid contributor Rover 75 Saloon Join Date: Sep 2017 Location: Stockton-on-Tees Posts: 243 Thanks: 6 Thanked 64 Times in 49 Posts	Hmm, Rovetech. I wish i dared to go there, as I work about five mins walk away. However, I took my 25 there once and feel like I was taken advantage of. They charged beyond top dollar for a simple electrical fault. And then said I had HGF and that would be £750. Hmm! I would appreciate if you could post back and let us know how you get on.

10th May 2022, 10:50	#8
BRI Avid contributor 75 saloon Join Date: Mar 2009 Location: Middlesbrough Posts: 224 Thanks: 96 Thanked 63 Times in 51 Posts	I will only use northeast 4x4 Ross Road Stockton never had a problem in about 10 years all ex rover guys Only thing is they do get very busy

11th May 2022, 19:03	#9
richw Avid contributor Rover 75 Saloon Join Date: Sep 2017 Location: Stockton-on-Tees Posts: 243 Thanks: 6 Thanked 64 Times in 49 Posts	Cool, that is worth bearing in mind. Ronnie, is Gary in Seaton? Could be handy.