Number Plates - Page 2

Mike Trident · 1st March 2020, 22:09

Front , I used the screws that were already there, although I have ordered some new ones.

The rear , I used sticky number plate pads from my local car shop.
My old plate was screwed on, but I prefer the unmarked plate.

richw · 2nd March 2020, 19:56

Cheers, I shall tryvsimlar.

1st March 2020, 22:09	#11
Mike Trident Posted a thing or two Rover 75 CDTi Saloon & Citroen C1 Join Date: Jun 2016 Location: Oakenshaw, Near Bradford Posts: 1,622 Thanks: 385 Thanked 552 Times in 328 Posts	Front , I used the screws that were already there, although I have ordered some new ones. The rear , I used sticky number plate pads from my local car shop. My old plate was screwed on, but I prefer the unmarked plate. __________________ Rover 75 2.0 CDTi (131Ps) Conn SE Saloon. (Manual) 160 Remap, cruise control, electric window blind, temp gauge, Real walnut / ZT interior, FBH with GSM control. BORN Tuesday, 5th October 2004 @ 12:35:52 This vehicle was the 104,679th 75 to run off the production line, out of 112,381 This vehicle was the 3,318th 75 CDT Connoisseur SE (135) to be made out of 4,744 This vehicle was the 12,440th 75 in Starlight Silver (code: MBB) to be made out of 14,280 Starlight Silver 75s

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

2nd March 2020, 19:56	#12
richw Avid contributor Rover 75 Saloon Join Date: Sep 2017 Location: Stockton-on-Tees Posts: 243 Thanks: 6 Thanked 64 Times in 49 Posts	Cheers, I shall tryvsimlar.