Where have all the badges gone? - Page 2

Southern Star · 14th December 2021, 18:17

Quote:

Originally Posted by suzublu

Removing the grill is a 2 minute job, just the 2 plastic screws on top 😎

Sent from my SM-A326B using Tapatalk

Thank you, that is what I didn't know, it's not something I've ever had to do. I'll have a look .

Southern Star · 14th December 2021, 18:18

Quote:

Originally Posted by trikey

Only on a MK1

Hold my previous reply then, mine is the facelift model.

suzublu · 14th December 2021, 18:21

Quote:

Originally Posted by trikey

Only on a MK1

Yeah, forgot about the silly MK 2 version

suzublu · 14th December 2021, 18:23

Quote:

Originally Posted by Southern Star

Hold my previous reply then, mine is the facelift model.

Bumper loosen then I'm afraid. Top screws all out and tilt the bumper forward to access the rear of the grill.

Southern Star · 14th December 2021, 18:25

Quote:

Originally Posted by suzublu

Yeah, forgot about the silly MK 2 version

Ok, mine is the Mk2 so I'm guessing it's a lot more involved then?

I thought a previous reply was strange because I'd never seen obvious fixings for the grille, and I'm sure I would have done if they were there to see.

I'd like to fit one but not if it's going to take several hours to do.

Southern Star · 14th December 2021, 18:29

Quote:

Originally Posted by suzublu

Bumper loosen then I'm afraid. Top screws all out and tilt the bumper forward to access the rear of the grill.

Think we cross-posted there, I don't think I could be bothered to do this to fit a badge especially as I know the screws won't have been removed ever and will be reluctant to surrender their advantage.

bsafly · 14th December 2021, 20:28

Quote:

Originally Posted by trikey

Only on a MK1

Not a Mk 1 ZT-T though!

crown · 14th December 2021, 20:44

Mines here.

Sent from my SM-G965F using Tapatalk

Southern Star · 14th December 2021, 20:57

I do have some crazily adhesive double-sided tape, maybe that would work.

Arctic · 14th December 2021, 21:45

[QUOTE=trikey;2912328]Mine is right here ��

Hi Andy.
At least yours will not fade due to differing weather conditions

Also a trick was missed when having them designed and made, they should have been made the same shape as the original badges, i bet we would all have tried them out then.
https://www.ebay.co.uk/itm/324016475812

https://www.ebay.co.uk/itm/233147370117

14th December 2021, 20:44	#18
crown Gets stuck in mg zt saloon Join Date: Jun 2013 Location: Norwich Posts: 868 Thanks: 463 Thanked 142 Times in 106 Posts	Mines here. Sent from my SM-G965F using Tapatalk __________________ [SIGPIC][/SIGPIC]mods so far; auto boot lift mod, stainless steel back box, jvc double din head unit, vibe speakers, black oak dash, plenum mod, refurbished hairpins, retro fit illuminated sun visors k & n air filter,aero wipers.retro fit electric rear blind. roewe front bumper with mg grill badge.new turbo vac pipes.

14th December 2021, 21:45	#20
Arctic Give to Learn Freelander 2 Join Date: Aug 2010 Location: West Midlands Posts: 18,701 Thanks: 1,155 Thanked 6,407 Times in 3,874 Posts	[QUOTE=trikey;2912328]Mine is right here �� Hi Andy. At least yours will not fade due to differing weather conditions Also a trick was missed when having them designed and made, they should have been made the same shape as the original badges, i bet we would all have tried them out then. https://www.ebay.co.uk/itm/324016475812 https://www.ebay.co.uk/itm/233147370117 __________________ Arctic Givology Learn to Give Everything is Achievable ad altiora tendo. Check out our Nano meet dates http://www.midlandsnanomeets.co.uk/ http://www.the75andztclub.co.uk/index.php?thepage=howto " You do the work , we supply the expertise " Last edited by Arctic; 14th December 2021 at 21:48..

14th December 2021, 20:57	#19
Southern Star Loves to post Rover 75 CTDi Contemporary SE Join Date: Jul 2013 Location: Stretton-under-Fosse, Warwickshire. Posts: 358 Thanks: 54 Thanked 134 Times in 83 Posts	I do have some crazily adhesive double-sided tape, maybe that would work.