|
||
|
6th May 2021, 11:11 | #21 |
Avid contributor
Rover 75 CDTi Tourer, CDTi Tourer, Saloon Join Date: Sep 2007
Location: ROME
Posts: 216
Thanks: 60
Thanked 32 Times in 22 Posts
|
Old stock, 60 euro in Italy. Looks genuine: what's the correct tool to remove the insert ? Looks like an "empy torx" one...
__________________
Rover 75 Connoisseur Tourer (Two), Contemporary SE Saloon and (**** most of all **** ) Wolseley 6/99 and SD1 2000 owner Regular Member |
6th May 2021, 23:33 | #22 | |
Give to Learn
Freelander 2 Join Date: Aug 2010
Location: West Midlands
Posts: 18,716
Thanks: 1,155
Thanked 6,407 Times in 3,874 Posts
|
Quote:
yes its a security torx with a little nipple in the centre, so torx needed with centre hole, you can use a small flat blade down the side of the nipple and up against the wall of the screw. 1 Once removed replace them with stainless steel screws. 2 3 4 5 6 Maybe worth doing the MAF mod below, it helps remove the plug if the MAF ever goes out of spec and the car goes into limp mode, you can then remove the plug, this will help you drive home properly, no limp mode. https://www.the75andztclub.co.uk/for...d.php?t=307029
__________________
Arctic Givology Learn to Give Everything is Achievable ad altiora tendo. Check out our Nano meet dates http://www.midlandsnanomeets.co.uk/ http://www.the75andztclub.co.uk/index.php?thepage=howto " You do the work , we supply the expertise " Last edited by Arctic; 6th May 2021 at 23:37.. |
|
7th May 2021, 06:18 | #23 |
Avid contributor
Rover 75 CDTi Tourer, CDTi Tourer, Saloon Join Date: Sep 2007
Location: ROME
Posts: 216
Thanks: 60
Thanked 32 Times in 22 Posts
|
Great! Thank you. I have somewhere a security torx set.. just trying to remember where :-)
__________________
Rover 75 Connoisseur Tourer (Two), Contemporary SE Saloon and (**** most of all **** ) Wolseley 6/99 and SD1 2000 owner Regular Member |
7th May 2021, 19:32 | #24 |
Premium Trader
75 CDT Tourer,2.5 Launch Saloon, Omipro MG/Rover (T4) Join Date: Jul 2007
Location: Liversedge, West Yorkshire
Posts: 5,405
Thanks: 1,105
Thanked 1,340 Times in 661 Posts
|
Normal torx security bits won't be any good on the original maf insert screws.
Torx security bits have 6 points, the ones you need are 5 point security bits Russ
__________________
Replacement Key Service http://https://the75andztclub.co.uk/...d.php?t=244732 Full T4 Testbook diagnostics available. Diesel ECU repair and replacement. Options enabled or disabled as required. Diesel X-Power 135 and 160bhp, Rover 1.8T 150 to 160 MG 160 V6 to 177 upgrades available P.M. for details. |
|
|