|
|
|
|
|
|
||
|
|
||
2nd August 2017, 08:19
|
#1 |
|
Avid contributor
BMW F30 Had a MG ZT Join Date: Oct 2016
Location: Cannock
Posts: 209
Thanks: 59
Thanked 69 Times in 48 Posts
|
Handbrake Assy Gaiter - MR ZR / 25
Just wanted to ask if anybody has a Handbrake Assy Gaiter for a MG ZR MK2 Part No.: FJL000430PMA before I purchase one off eBay etc.
The ones on eBay say "Originally fitted to the MG 3 SW" ???  |
|
|
|
2nd August 2017, 08:45
|
#2 |
|
Avid contributor
BMW F30 Had a MG ZT Join Date: Oct 2016
Location: Cannock
Posts: 209
Thanks: 59
Thanked 69 Times in 48 Posts
|
Link to one that sold on here before just for info:-
https://the75andztclub.co.uk/forum/showthread.php?t=258508 |
|
|
|
|
2nd August 2017, 09:09
|
#3 |
|
Precise
Rover 75 Tourer 2.5KV6 Connoisseur SE Join Date: Mar 2013
Location: Fleet
Posts: 2,954
Thanks: 630
Thanked 617 Times in 480 Posts
|
|
|
|
|
|
2nd August 2017, 09:23
|
#4 |
|
Avid contributor
BMW F30 Had a MG ZT Join Date: Oct 2016
Location: Cannock
Posts: 209
Thanks: 59
Thanked 69 Times in 48 Posts
|
Hi Kwil
Thanks for the reply, but I should of said that mine has come away from the plastic that clips into the centre console so I need a complete new one as the leather just pulls off the clip and the clip is not tight enough in the console. |
|
|
|
|
2nd August 2017, 14:19
|
#5 |
|
Posted a thing or two
Rover 75 saloon Join Date: Nov 2012
Location: Bordon
Posts: 1,856
Thanks: 250
Thanked 403 Times in 352 Posts
|
In the past I've had this scenario on Peugeots
Can you not remove the plastic frame and reattach the leather gator with staples or wire (small drill bit and a dremel required) then put a dab of epoxy or gripfill on the plastic clips and then refit the plastic frame to the console Regards Chris |
|
|
|
|
5th August 2017, 08:38
|
#6 |
|
Posted a thing or two
Rover 75 Connie Mk2 1.8 (Mo) Join Date: Feb 2017
Location: Sheffield
Posts: 1,531
Thanks: 875
Thanked 335 Times in 289 Posts
|
Just to let you know, they might just send you the gaiter, expecting you to fit it to the plastic foot yourself.
This happened with me so I got some leather glue but am still psyching myself up to do the job. Holding it in place with quick release G clamps is a good idea. I'm changing the gearstick gaiter too, the retaining spring clips broke off so I'm going to have to hope the glue sticks it properly to the plastic ring without them. Changing both from black to sandstone beige with a plastic walnut handbrake handle and I've also re-sprayed the chrome gearstick bottom trim antique gold 
__________________
Mo was born Tuesday, 22nd June 2004 @ 08:32:41 This vehicle was the 99,307th 75 to run off the production line, out of 112,381 This vehicle was the 5,377th 75 1.8 Connoisseur to be made out of 6,033 This vehicle was the 783rd 75 in Firefrost Red (code: CEV) to be made out of 2,089 Firefrost Red 75s |
|
|
|
 |
|
|
Linear Mode
