key cutting saga

[jonno12]

hi guys
just enquiring if our key cutting gurus have managed to evolve into other
motors as iv'e lost my key to the mrs range rover and I dread phoning land rover any help would be much appreciated, lucky enough I have always thought the same as marinabrian that only having 1 key is not very sensible so I will renew asap one way or the other. jonno

[marinabrian]

What year and model in the Range Rover, you may well be surprised

I ordered a key for a Freelander direct from Land Rover, and it was only £85 and all that needed doing was to code a replacement 17TN remote fob to the BCU.

It was supplied cut and would open and start the car..........bit more information would help perhaps

Brian

[jonno12]

thanks for the reply brian, it's a 2006 range rover sport, 2.7 engine, i'll ring them tomorrow with fingers crossed, I was only going by bmw for our cars.

[marinabrian]

Originally Posted by jonno12

thanks for the reply brian, it's a 2006 range rover sport, 2.7 engine, i'll ring them tomorrow with fingers crossed, I was only going by bmw for our cars.

Ah, an L322.....well the EWS is located under the centre console to the right hand side of the gear selector assembly, and just like the 75 and ZT models I can programme a replacement transponder.

I can't quite remember if a second hand key remote can be programmed to the BCU, but you could quite cheaply produce a key which would at least start the car

Brian

You can get a key blank cut to fit the car HERE

[jonno12]

Originally Posted by marinabrian

Ah, an L322.....well the EWS is located under the centre console to the right hand side of the gear selector assembly, and just like the 75 and ZT models I can programme a replacement transponder.

I can't quite remember if a second hand key remote can be programmed to the BCU, but you could quite cheaply produce a key which would at least start the car

Brian

You can get a key blank cut to fit the car HERE

thank you brian, I knew you were the man, will see what I can do, and let you know

[jonno12]

hi brian, i'm afraid that link doesn't include the sportalthough it says that in advert it's not on the list but will contact them .

[marinabrian]

Originally Posted by jonno12

hi brian, i'm afraid that link doesn't include the sportalthough it says that in advert it's not on the list but will contact them .

Does your key look like this ?



If it does, it will more than likely be a standard BMW type HU92 blade, but the seller I linked to will be able to sort the mechanical part of the key I'm sure

Brian

[jonno12]

well brian, my thoughts of landrover were correct, £185 for key plus £75 plus v.a.t for coding. the buttons on my key are not the same as your showing but I'm hopeless at sending photo's but will persevere.jonno

[RoverP480]

2006 RR sport is a L320 , similar underpinnings as Discovery 3 . I understand a used key can be programed with the right kit .
Have a look at https://www.disco3.co.uk/forum/

[Arctic]

Hi Jonno.
I know you have lost your keys, but take a look at the video below are or were yours key fob the same as in the film ?

http://www.roverparts.com/resources/...nge-rover-lr3/