Rover 75 mesh grill

Si-monogram · 27th March 2016, 20:07

Hiya, how easy is it to get a grill with mesh or do a DIY job?

Many thanks

wullie480 · 27th March 2016, 20:21

Quote:

Originally Posted by MR190

Hiya, how easy is it to get a grill with mesh or do a DIY job?

Many thanks

Check the how to section there is a few members who carried it out.

suzublu · 27th March 2016, 20:25

Doddle, but you have to use quality stainless mesh

Si-monogram · 27th March 2016, 20:31

Thanks for the replies

Jim Jamieson · 27th March 2016, 22:13

It's relatively easy to do. I've done my V6 and in the process of doing another one for a friend.

Tip. I removed the Rover badge then drilled a hole in the centre of the base and bolted the mesh grille into place. This pulls the mesh into the curve of the grille then you simply re apply the Rover badge.

jonathan63 · 27th March 2016, 22:19

Have a look at this.

http://www.the75andztclub.co.uk/foru...=75%27s&page=3

Courtesy of Jim

Jim Jamieson · 27th March 2016, 22:30

Thank you again for that !
I had forgot that I had those piccies on my post.

barney bear · 28th March 2016, 07:21

Quote:

Originally Posted by suzublu

Doddle, but you have to use quality stainless mesh

Oooooh, I like that badge Ronnie

Who has them then

stevenicks · 28th March 2016, 10:14

I bought my mesh off eBay Simon and then sprayed it black just to be different

27th March 2016, 20:07	#1
Si-monogram Banned MG ZTT TYPHOON 180, PPD 75 CDTI 160, METRO 1.3 A+, ABARTH TURISMO 595, MG ZS V6, 75 duotone tourer Join Date: Mar 2015 Location: Kenilworth Posts: 1,498 Thanks: 448 Thanked 405 Times in 284 Posts	Rover 75 mesh grill Hiya, how easy is it to get a grill with mesh or do a DIY job? Many thanks

28th March 2016, 10:14	#9
stevenicks This is my second home MG ZT 180 Auto / Rover 75 2.0 Diesel Join Date: Apr 2013 Location: Brecon. Posts: 7,465 Thanks: 3,297 Thanked 1,666 Times in 1,264 Posts	I bought my mesh off eBay Simon and then sprayed it black just to be different __________________ "You're Not Laughing Now Are You?" Steve

27th March 2016, 20:25	#3
suzublu This is my second home rover 75 1.8 vvc club se wedgwood blue Join Date: Aug 2009 Location: Seaton Carew Posts: 26,922 Thanks: 65 Thanked 7,142 Times in 4,642 Posts	Doddle, but you have to use quality stainless mesh

27th March 2016, 20:31	#4
Si-monogram Banned MG ZTT TYPHOON 180, PPD 75 CDTI 160, METRO 1.3 A+, ABARTH TURISMO 595, MG ZS V6, 75 duotone tourer Join Date: Mar 2015 Location: Kenilworth Posts: 1,498 Thanks: 448 Thanked 405 Times in 284 Posts	Thanks for the replies

27th March 2016, 22:13	#5
Jim Jamieson This is my second home Rover less ! Join Date: Jun 2011 Location: Tarbolton Posts: 3,442 Thanks: 393 Thanked 888 Times in 542 Posts	It's relatively easy to do. I've done my V6 and in the process of doing another one for a friend. Tip. I removed the Rover badge then drilled a hole in the centre of the base and bolted the mesh grille into place. This pulls the mesh into the curve of the grille then you simply re apply the Rover badge.

27th March 2016, 22:19	#6
jonathan63 This is my second home CDTi Conniosseur SE HLNav Tourer and a Personal Line CDT Conniosseur SE Tourer..for the time being. Join Date: Jul 2010 Location: Cumbria Posts: 3,639 Thanks: 340 Thanked 423 Times in 294 Posts	Have a look at this. http://www.the75andztclub.co.uk/foru...=75%27s&page=3 Courtesy of Jim

27th March 2016, 22:30	#7
Jim Jamieson This is my second home Rover less ! Join Date: Jun 2011 Location: Tarbolton Posts: 3,442 Thanks: 393 Thanked 888 Times in 542 Posts	Thank you again for that ! I had forgot that I had those piccies on my post.