old/dead diesel in-tank fuel pump? Wanted

pondweed · 17th November 2008, 11:04

I might have a try at dissecting an old one to see where its worn - has anyone got a failed one they want to sell me?
If anyone is about to get one replaced by the garage, please don't throw it...!

pondweed · 1st December 2008, 11:01

bump! still after one, or if you want to hang onto it, just the dimensions of the original pump cannister.

Walbro are going to see if they can match something without having to buy all the peugeot gubbins.

scgfull · 1st December 2008, 17:31

Hi Pondweed,

I recently bought a dead one on Ebay to dissect and attempt to repair before mine dies.

I had intended to leave it until after Christmas to take apart but will try and find time during this week. I will let you know the dimensions as soon as I have them.

As an aside I note that there is one on Ebay at the moment going cheap.

Steve

pondweed · 1st December 2008, 17:42

fab. many thanks. take me couple of pics of the cannister ends too and I'll forward that all on to them - it will be almost as good as having the thing in front of them (we hopes)

scgfull · 1st December 2008, 18:51

Ok will do.

Steve

scgfull · 30th December 2008, 18:59

Hi Pondweed,

I have now got the blessed pump in pieces. What measurements do you need?

I will try and uplift some photos shortly.

pondweed · 30th December 2008, 19:03

brill!

well, anything off the cannister/electrical pump itself. - dia, length, anything else you think relevant to finding another to fit!

Walbro have indicated from photos that it appears to be "similar to one of their range" but the measurements will help a great deal to getting something priced.

scgfull · 30th December 2008, 19:24

pictures:

scgfull · 30th December 2008, 19:24

picture 2:

scgfull · 30th December 2008, 19:25

picture 3:

17th November 2008, 11:04	#1
pondweed This is my second home Waiter, Waiter! I seem to have a Roomster in my drive... Join Date: Nov 2006 Location: Sussex Posts: 3,268 Thanks: 0 Thanked 1 Time in 1 Post	old/dead diesel in-tank fuel pump? Wanted I might have a try at dissecting an old one to see where its worn - has anyone got a failed one they want to sell me? If anyone is about to get one replaced by the garage, please don't throw it...!

1st December 2008, 17:31	#3
scgfull Loves to post none Join Date: Jun 2008 Location: resigned - but can't get off Posts: 286 Thanks: 0 Thanked 0 Times in 0 Posts	Hi Pondweed, I recently bought a dead one on Ebay to dissect and attempt to repair before mine dies. I had intended to leave it until after Christmas to take apart but will try and find time during this week. I will let you know the dimensions as soon as I have them. As an aside I note that there is one on Ebay at the moment going cheap. Steve __________________ Steve Memeber 4069 Last edited by scgfull; 1st December 2008 at 17:31.. Reason: typo

1st December 2008, 18:51	#5
scgfull Loves to post none Join Date: Jun 2008 Location: resigned - but can't get off Posts: 286 Thanks: 0 Thanked 0 Times in 0 Posts	Ok will do. Steve __________________ Steve Memeber 4069

30th December 2008, 18:59	#6
scgfull Loves to post none Join Date: Jun 2008 Location: resigned - but can't get off Posts: 286 Thanks: 0 Thanked 0 Times in 0 Posts	Hi Pondweed, I have now got the blessed pump in pieces. What measurements do you need? I will try and uplift some photos shortly. __________________ Steve Memeber 4069

30th December 2008, 19:24	#8
scgfull Loves to post none Join Date: Jun 2008 Location: resigned - but can't get off Posts: 286 Thanks: 0 Thanked 0 Times in 0 Posts	pictures: __________________ Steve Memeber 4069

1st December 2008, 11:01	#2
pondweed This is my second home Waiter, Waiter! I seem to have a Roomster in my drive... Join Date: Nov 2006 Location: Sussex Posts: 3,268 Thanks: 0 Thanked 1 Time in 1 Post	bump! still after one, or if you want to hang onto it, just the dimensions of the original pump cannister. Walbro are going to see if they can match something without having to buy all the peugeot gubbins.

1st December 2008, 17:42	#4
pondweed This is my second home Waiter, Waiter! I seem to have a Roomster in my drive... Join Date: Nov 2006 Location: Sussex Posts: 3,268 Thanks: 0 Thanked 1 Time in 1 Post	fab. many thanks. take me couple of pics of the cannister ends too and I'll forward that all on to them - it will be almost as good as having the thing in front of them (we hopes)

30th December 2008, 19:03	#7
pondweed This is my second home Waiter, Waiter! I seem to have a Roomster in my drive... Join Date: Nov 2006 Location: Sussex Posts: 3,268 Thanks: 0 Thanked 1 Time in 1 Post	brill! well, anything off the cannister/electrical pump itself. - dia, length, anything else you think relevant to finding another to fit! Walbro have indicated from photos that it appears to be "similar to one of their range" but the measurements will help a great deal to getting something priced.

30th December 2008, 19:24	#9
scgfull Loves to post none Join Date: Jun 2008 Location: resigned - but can't get off Posts: 286 Thanks: 0 Thanked 0 Times in 0 Posts	picture 2: __________________ Steve Memeber 4069

30th December 2008, 19:25	#10
scgfull Loves to post none Join Date: Jun 2008 Location: resigned - but can't get off Posts: 286 Thanks: 0 Thanked 0 Times in 0 Posts	picture 3: __________________ Steve Memeber 4069