Headlamp washer parts

neilbaker86 · 13th January 2018, 15:52

Thought I'd post this on here as it may prove useful to others at some point. I snapped the connector to the headlamp washer pump on my facelift ZT when removing the hose to diagnose a fault with the non-return valve.

X-Part only supply the complete hose assembly (DNH000250) and these are £71.63 +VAT from the only supplier I could find (A E Wilcox).

However, I have found that these are made by Hella and are used on various other vehicles. The non-return valve is available from BMW for £9.11 +VAT on part number 61668361447.

And the pump/washer connectors (these are a 90° fitment, two on the original hose are 70° or so, but these are very similar and fit OK) are also available from BMW on part number 61678252741 for £2.00 each +VAT.

Hopefully this helps someone someday!

COLVERT · 13th January 2018, 18:59

Quote:

Originally Posted by neilbaker86

Thought I'd post this on here as it may prove useful to others at some point. I snapped the connector to the headlamp washer pump on my facelift ZT when removing the hose to diagnose a fault with the non-return valve.

X-Part only supply the complete hose assembly (DNH000250) and these are £71.63 +VAT from the only supplier I could find (A E Wilcox).

However, I have found that these are made by Hella and are used on various other vehicles. The non-return valve is available from BMW for £9.11 +VAT on part number 61668361447.

And the pump/washer connectors (these are a 90° fitment, two on the original hose are 70° or so, but these are very similar and fit OK) are also available from BMW on part number 61678252741 for £2.00 each +VAT.

Hopefully this helps someone someday!

It would be very useful if you went and posted this information in the INTERCHANGABLE PARTS thread at the top of the main page.---

Could be a good money saver for other folk.---

neilbaker86 · 13th January 2018, 19:39

Thank you, I have found the thread and replied to it with this information.

13th January 2018, 15:52	#1
neilbaker86 Gets stuck in MG ZT Join Date: Jun 2011 Location: Oxford Posts: 847 Thanks: 124 Thanked 312 Times in 147 Posts	Headlamp washer parts Thought I'd post this on here as it may prove useful to others at some point. I snapped the connector to the headlamp washer pump on my facelift ZT when removing the hose to diagnose a fault with the non-return valve. X-Part only supply the complete hose assembly (DNH000250) and these are £71.63 +VAT from the only supplier I could find (A E Wilcox). However, I have found that these are made by Hella and are used on various other vehicles. The non-return valve is available from BMW for £9.11 +VAT on part number 61668361447. And the pump/washer connectors (these are a 90° fitment, two on the original hose are 70° or so, but these are very similar and fit OK) are also available from BMW on part number 61678252741 for £2.00 each +VAT. Hopefully this helps someone someday!

13th January 2018, 19:39	#3
neilbaker86 Gets stuck in MG ZT Join Date: Jun 2011 Location: Oxford Posts: 847 Thanks: 124 Thanked 312 Times in 147 Posts	Thank you, I have found the thread and replied to it with this information.