|
||
|
5th January 2011, 07:34 | #11 |
Gets stuck in
Rover 75 Con SE CDTi, 205 GTi 1.9 (x 2), 205 CTi 1.9, 205 GTi Mi16, Ford C-Max 2.0 TDCi Ghia, MR2 GT Join Date: Nov 2008
Location: Alderholt, Nr Fordingbridge
Posts: 935
Thanks: 11
Thanked 15 Times in 9 Posts
|
Thanks Roving Dennis, look good value and my light has just come on. Will do some checks then maybe buy a sensor or two...Thanks :xmas-smiley-031:
__________________
|
6th January 2011, 13:39 | #12 | |
Gets stuck in
Rover 75 CDT 135+ Club saloon, Wegwood Blue. Join Date: Jul 2009
Location: Worcestershire,
Posts: 586
Thanks: 0
Thanked 0 Times in 0 Posts
|
Quote:
__________________
Wedgwood Blue 75. |
|
17th January 2011, 19:41 | #13 |
Gets stuck in
Rover 75 Con SE CDTi, 205 GTi 1.9 (x 2), 205 CTi 1.9, 205 GTi Mi16, Ford C-Max 2.0 TDCi Ghia, MR2 GT Join Date: Nov 2008
Location: Alderholt, Nr Fordingbridge
Posts: 935
Thanks: 11
Thanked 15 Times in 9 Posts
|
Thanks Dennis, bought the sensors, still have fault so have ordered another rear for the other side, if that does not work will have to get onto a T4 for some diagnostic checks....
__________________
|
17th January 2011, 20:44 | #14 |
Avid contributor
Rover 75 Join Date: Mar 2009
Location: Newcastle
Posts: 246
Thanks: 2
Thanked 1 Time in 1 Post
|
A reoccuring fault i had was traced to a rusted rear hub face a quick clean on the bench buffer sorted that
__________________
__________________________ LOOKING FOR .... GT2052GLS 731320-0001 |
17th January 2011, 20:52 | #15 |
Gets stuck in
Rover 75 Con SE CDTi, 205 GTi 1.9 (x 2), 205 CTi 1.9, 205 GTi Mi16, Ford C-Max 2.0 TDCi Ghia, MR2 GT Join Date: Nov 2008
Location: Alderholt, Nr Fordingbridge
Posts: 935
Thanks: 11
Thanked 15 Times in 9 Posts
|
Thanks John appreciate the feedback, I have not got round to looking at this yet.
__________________
Last edited by Reebmit; 24th January 2011 at 10:05.. |
28th September 2020, 19:31 | #16 |
Loves to post
Rover 75 Saloon Join Date: Jun 2017
Location: suffolk
Posts: 259
Thanks: 46
Thanked 25 Times in 23 Posts
|
My recent addition came with leaky water pump, no Speedo and ABS light on permanently. Helpful posts told me it was the drivers side bearing and possibly the sensor. Took the bearing out and found that the previous owner had bodged the job and managed to shake the seals of the bearing loose and the inner one was trapped. Reassembled carefully and ran the car in gear with the front wheels off the ground, Speedo OK but ABS light still on. One of the ABS threads says that the ABS resets itself when the car is in motion! Tried it and it worked. A car without an ABS light on the dashboard. Many thanks to all who share their knowledge and/or bitter experiences.
|
Thread Tools | |
Display Modes | |
|
|