|
||
|
26th February 2012, 07:42 | #1 |
Loves to post
Black ROVER 75 Join Date: Nov 2011
Location: Somewhere
Posts: 339
Thanks: 5
Thanked 17 Times in 7 Posts
|
steering wheel controls
I want to know how to connect my new DD unit to the steering wheel controls. Reading up in here I want to use the wires from here(pic below)
but which wires go where. on the new DD unit I have a pink wire (labeled black), a brown wire labeled as ground and a white wire with no label at all. So what goes where? thanks in advance |
26th February 2012, 09:37 | #2 |
Passed Away
Rover 75 CDT 03 auto Conn. SE Join Date: May 2009
Location: London
Posts: 2,885
Thanks: 104
Thanked 254 Times in 204 Posts
|
Dd unit
If it is one of Seans DD s then it has a red connector with a Green (steering Key-1) and a Black (steering Grnd) lead on it. Cut off the red connector and join the Green lead to the Blue/Purple lead and the Black lead to the Blue/Orange lead in the MAIN LOOM. It should work straight away as Seans DD units arrive with the 'WHEEL' set up programme already done. You can disconnect the interface box and must remove the bracket to allow the DD to fit.
|
26th February 2012, 17:00 | #3 |
Loves to post
Black ROVER 75 Join Date: Nov 2011
Location: Somewhere
Posts: 339
Thanks: 5
Thanked 17 Times in 7 Posts
|
Cheers for that... all done and working.
|
|
|