|
||
|
11th March 2014, 20:18 | #1 |
This is my second home
Jaguar XFR 2011MY Join Date: Oct 2013
Location: Harlow
Posts: 6,363
Thanks: 19
Thanked 816 Times in 759 Posts
|
Various bits at POL or National
I have a few bits laying around that I would like to get rid of, but they aren't really worth anything individually so thought I would give them away, I am going POL and national at Gaydon this year so will take them with me. Not willing to post, the list is as follows:
O/S rear ZT lense (clear indicator not smoked) no buld holder included A diesel oil filler cap in yellow a pair of the perrys front mat fixing clips (1 set) 16 wheel nuts and 4 x locking buts with key (old and used) a blue washer bottle cap grab handle blanks in smokestone both heater closure panels in plastic ash grey/smokestone both a pillar trims in smokestone small cigarette burn in drivers one |
13th March 2014, 19:31 | #2 |
This is my second home
Jaguar XFR 2011MY Join Date: Oct 2013
Location: Harlow
Posts: 6,363
Thanks: 19
Thanked 816 Times in 759 Posts
|
These will start going into the bin soon by the way, to make room for car cleaning products, as I do have a black car
|
13th March 2014, 20:33 | #3 |
Posted a thing or two
MGB GT, 2 Morris Minor Travellers Join Date: May 2011
Location: Bilston
Posts: 1,663
Thanks: 1,610
Thanked 497 Times in 370 Posts
|
Wheel bolts
Hi Jordan,
Are the wheel bolts the black type? I'm after 4 to do away with locking wheel bolts. If you would let me know and a price that'll be great, I'll be going to the National meet. Thanks, Martyn |
14th March 2014, 08:43 | #4 |
This is my second home
Jaguar XFR 2011MY Join Date: Oct 2013
Location: Harlow
Posts: 6,363
Thanks: 19
Thanked 816 Times in 759 Posts
|
Replied to your pm mate, unfortunately not black that's what I replaced these with, you could wire brush them and paint them with good results, and everything here is free
|
22nd March 2014, 08:05 | #5 |
This is my second home
MG ZT CDTI Join Date: Jun 2011
Location: Sutton in ashfield
Posts: 6,751
Thanks: 1,017
Thanked 699 Times in 501 Posts
|
Hi Jordan, could I possibly have the offside rear lens if it's in good condition and also the mat fixing clips pweeeeezzzzeeee :-)
Don't want much do I? Lol |
22nd March 2014, 08:28 | #6 |
This is my second home
Jaguar XFR 2011MY Join Date: Oct 2013
Location: Harlow
Posts: 6,363
Thanks: 19
Thanked 816 Times in 759 Posts
|
Yeah sure the lense is fine, I will dig them out today and photo them for you mate and well it all has to go
|
22nd March 2014, 09:34 | #7 |
This is my second home
MG ZT CDTI Join Date: Jun 2011
Location: Sutton in ashfield
Posts: 6,751
Thanks: 1,017
Thanked 699 Times in 501 Posts
|
Thanks very much mate
|
22nd March 2014, 09:51 | #8 |
This is my second home
Jaguar XFR 2011MY Join Date: Oct 2013
Location: Harlow
Posts: 6,363
Thanks: 19
Thanked 816 Times in 759 Posts
|
No problem, cleaned the lense up and it looks fine and have the clips still in their bag, picture to follow when the camera imports them put in the pile with your dash
|
22nd March 2014, 10:09 | #9 |
This is my second home
Jaguar XFR 2011MY Join Date: Oct 2013
Location: Harlow
Posts: 6,363
Thanks: 19
Thanked 816 Times in 759 Posts
|
I now have other items to add to this list:
an atc unit with a black oak fascia stuck on, however the base of the holes on the facia have been trimmed with a stanley blade. A pair of skull cap mirrors in PBT (Pearl Black, but the drivers side one got knocked from another car and how the glass housing doesn't sit back inside the mirror properly. A brand new 4 hole walnut switch trim and a used 5 hole walnut switch trim. All of the previous parts are available apart from the mat fixings and the light lense |
22nd March 2014, 10:12 | #10 |
This is my second home
Jaguar XFR 2011MY Join Date: Oct 2013
Location: Harlow
Posts: 6,363
Thanks: 19
Thanked 816 Times in 759 Posts
|
|
|
|