Another 75 CDTI starting problem - Page 2

Jamiewelch · 2nd June 2019, 15:44

Quote:

Originally Posted by Mike Noc

Have you tried a different cam sensor? Does the rev counter needle move slightly when cranking?

Good point! We forgot the cam sensor and crank sensor! Also try the crank sensor, when cranking you can see if it reports any RPM in TOAF, if it does then the sensor is most likely OK.

Bowler351 · 2nd June 2019, 17:50

I have changed out the cam and crank sensors, crank sensor was deffo crook and did the cam as a matter of course

Bowler351 · 9th June 2019, 12:48

Ok so tried a leak back test and very little leak off any of them and all roughly even. So i am here to assume that its down to an ecu problem still have tried to contact Brian to no avail yet, anyone any suggestions?

bl52krz · 10th June 2019, 12:53

When was the last time you changed the fuel filter?

10th June 2019, 12:53	#14
bl52krz This is my second home Rover 75 cdt club + Rover 2.5 KV6 Conni SE Join Date: May 2008 Location: Birmingham Posts: 11,394 Thanks: 6,587 Thanked 2,262 Times in 1,729 Posts	When was the last time you changed the fuel filter? __________________ Great Barr, Birmingham.

2nd June 2019, 17:50	#12
Bowler351 Newbie MG ZT-T Join Date: Apr 2016 Location: Stoke-On-Trent Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts	I have changed out the cam and crank sensors, crank sensor was deffo crook and did the cam as a matter of course

9th June 2019, 12:48	#13
Bowler351 Newbie MG ZT-T Join Date: Apr 2016 Location: Stoke-On-Trent Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts	Ok so tried a leak back test and very little leak off any of them and all roughly even. So i am here to assume that its down to an ecu problem still have tried to contact Brian to no avail yet, anyone any suggestions?