Re, Help my exhaust is hanging off..

Ros3 · 9th September 2013, 23:18

Right have had a good look about underneath, and the exhaust has a hole in it at the back of the backbox just where the pipe joins on. So a new backbox it is. Anyone got any ideas about what I could get. I'm going for a stanless one so really I could have anything. ??.

pab · 10th September 2013, 05:13

If your going down the stainless route, just make sure that the manufacturer makes the box as quiet as possible. They can fabricate it with down turned pipes, and you don't have to worry about the rear mounting strap as it will have it's own hangers.

Ros3 · 10th September 2013, 16:21

I wouldent mind if it had a bit of a note to it. It's a V6 so it woulent be out of place. However I might have the chance of one from a former member, watch this space..

Jim Jamieson · 10th September 2013, 21:18

I can recommend a local guy (Elite Custom Exhaust) who does stainless systems, he did my twin outlet conversion.

Ros3 · 10th September 2013, 22:10

Quote:

Originally Posted by Jim Jamieson

I can recommend a local guy (Elite Custom Exhaust) who does stainless systems, he did my twin outlet conversion.

I looked at your's Jim on the way past. Might get lucky with the one I'm trying to get at the moment though.

Jim Jamieson · 11th September 2013, 13:46

Stop in by some time for a brew and I'll show you it in detail, The exhaust that is

Ros3 · 11th September 2013, 17:51

Aye ha, There always looks to be something going on out the front of your's Jim. When I get a chance I will stop in.

9th September 2013, 23:18	#1
Ros3 This is my second home Rover 75 V6 saloon (gone to the Rover garage in the sky), Mazda mx5 Phoenix. Join Date: Feb 2011 Location: Cumnock Posts: 3,215 Thanks: 347 Thanked 157 Times in 92 Posts	Re, Help my exhaust is hanging off.. Right have had a good look about underneath, and the exhaust has a hole in it at the back of the backbox just where the pipe joins on. So a new backbox it is. Anyone got any ideas about what I could get. I'm going for a stanless one so really I could have anything. ??.

10th September 2013, 05:13	#2
pab Banned MG ZT V6 190+ Join Date: Sep 2008 Location: Leeds Posts: 33,223 Thanks: 41 Thanked 1,614 Times in 1,416 Posts	If your going down the stainless route, just make sure that the manufacturer makes the box as quiet as possible. They can fabricate it with down turned pipes, and you don't have to worry about the rear mounting strap as it will have it's own hangers.

10th September 2013, 16:21	#3
Ros3 This is my second home Rover 75 V6 saloon (gone to the Rover garage in the sky), Mazda mx5 Phoenix. Join Date: Feb 2011 Location: Cumnock Posts: 3,215 Thanks: 347 Thanked 157 Times in 92 Posts	I wouldent mind if it had a bit of a note to it. It's a V6 so it woulent be out of place. However I might have the chance of one from a former member, watch this space..

10th September 2013, 21:18	#4
Jim Jamieson This is my second home Rover less ! Join Date: Jun 2011 Location: Tarbolton Posts: 3,442 Thanks: 393 Thanked 888 Times in 542 Posts	I can recommend a local guy (Elite Custom Exhaust) who does stainless systems, he did my twin outlet conversion.

11th September 2013, 13:46	#6
Jim Jamieson This is my second home Rover less ! Join Date: Jun 2011 Location: Tarbolton Posts: 3,442 Thanks: 393 Thanked 888 Times in 542 Posts	Stop in by some time for a brew and I'll show you it in detail, The exhaust that is

11th September 2013, 17:51	#7
Ros3 This is my second home Rover 75 V6 saloon (gone to the Rover garage in the sky), Mazda mx5 Phoenix. Join Date: Feb 2011 Location: Cumnock Posts: 3,215 Thanks: 347 Thanked 157 Times in 92 Posts	Aye ha, There always looks to be something going on out the front of your's Jim. When I get a chance I will stop in.