Congratulations!

The Rover Man · 11th October 2010, 00:21

Let me be the first to congratulate you, Colin. Well done!

Robson Rover Repair · 11th October 2010, 22:58

Thank you my man! I appreciate it. I will 100% endeavour to do what I can for us in the region, and I will be starting with a list of useful Ni specific information in abunch of stickies at the top of the page.

paddymcn · 15th October 2010, 18:37

Hi, I would just like to echo those sentiments, congratulations. I don't log on very often and was pleasantly surprised to see the 'regionalisation' of the club.

Reading through the site I get a good sense of your enthusiasm and had I known about voting I'm sure you would have got mine. Well done and good luck.

I'll try and log in a little more often now I'm off to read up on dodgy drivers door handles...

Robson Rover Repair · 15th October 2010, 18:55

Great to see you logging on again Paddy. We have an event on the 7th of November, be good to see ya there!

Whats up with the door handles? My rear passenger ones where very stiff until I took the door card off and rubbed petrol jelly around them.

paddymcn · 15th October 2010, 19:48

I think its the solenoid pack, 3 doors unlock with the remote but the drivers door needs the key plus on occasion the door will not open from the outside at all. I'm having to go the passenger side to get in, very annoying and its happening more and more often...

Robson Rover Repair · 15th October 2010, 19:56

Paddy, if you want ive the number here of the man that can solve all your issues?

http://bxrcars.co.uk/

Give Trevor a bell on monday morning around half 9. He will be able to advise you, hes delt with just about everything 75/ZT related and hes easy to pay also and can get the OEM parts a dam sight cheaper than even ive been able to source from ebay.

paddymcn · 15th October 2010, 20:06

Thanks Colin, I'll give him a call

Robson Rover Repair · 15th October 2010, 20:10

Tell him Colin Robson with the ZT that popped of the cam shaft seals recommended him, he will sort you out rightly.

The Rover Man · 4th June 2011, 20:57

Time for an update on this thread. Colin has been fantastic as our regional rep. He has put in many hours both organising events and interacting with the members. I know from discussions with other club members that he is universally liked and respected. He is someone who deserves his position.

I hope the club appreciates the efforts he has gone to to promote and expand it in Ireland.

First class job, Colin!

Reebs · 4th June 2011, 21:22

Yes we do

Well done Colin, your dedication is commendable

11th October 2010, 00:21	#1
The Rover Man Loves to post Rover 75 Classic CDT SE Join Date: Mar 2010 Location: Craigavon Posts: 458 Thanks: 0 Thanked 1 Time in 1 Post	Congratulations! Let me be the first to congratulate you, Colin. Well done!

11th October 2010, 22:58	#2
Robson Rover Repair NI/ROI RS ZT-T 190 / 75 Diesel x3 / 6 door limo / 216 Cabby / Rover 25 van Join Date: May 2009 Location: Antrim Posts: 8,103 Thanks: 299 Thanked 1,046 Times in 568 Posts	Thank you my man! I appreciate it. I will 100% endeavour to do what I can for us in the region, and I will be starting with a list of useful Ni specific information in abunch of stickies at the top of the page. __________________ Cheers, Colin Robson Rover Repair on Youtube DISCOUNTED MTEC BRAKES FOR ALL MG ROVER'S Braided hoses, more coating and pad options for 2024

15th October 2010, 18:55	#4
Robson Rover Repair NI/ROI RS ZT-T 190 / 75 Diesel x3 / 6 door limo / 216 Cabby / Rover 25 van Join Date: May 2009 Location: Antrim Posts: 8,103 Thanks: 299 Thanked 1,046 Times in 568 Posts	Great to see you logging on again Paddy. We have an event on the 7th of November, be good to see ya there! Whats up with the door handles? My rear passenger ones where very stiff until I took the door card off and rubbed petrol jelly around them. __________________ Cheers, Colin Robson Rover Repair on Youtube DISCOUNTED MTEC BRAKES FOR ALL MG ROVER'S Braided hoses, more coating and pad options for 2024

15th October 2010, 19:56	#6
Robson Rover Repair NI/ROI RS ZT-T 190 / 75 Diesel x3 / 6 door limo / 216 Cabby / Rover 25 van Join Date: May 2009 Location: Antrim Posts: 8,103 Thanks: 299 Thanked 1,046 Times in 568 Posts	Paddy, if you want ive the number here of the man that can solve all your issues? http://bxrcars.co.uk/ Give Trevor a bell on monday morning around half 9. He will be able to advise you, hes delt with just about everything 75/ZT related and hes easy to pay also and can get the OEM parts a dam sight cheaper than even ive been able to source from ebay. __________________ Cheers, Colin Robson Rover Repair on Youtube DISCOUNTED MTEC BRAKES FOR ALL MG ROVER'S Braided hoses, more coating and pad options for 2024

15th October 2010, 20:10	#8
Robson Rover Repair NI/ROI RS ZT-T 190 / 75 Diesel x3 / 6 door limo / 216 Cabby / Rover 25 van Join Date: May 2009 Location: Antrim Posts: 8,103 Thanks: 299 Thanked 1,046 Times in 568 Posts	Tell him Colin Robson with the ZT that popped of the cam shaft seals recommended him, he will sort you out rightly. __________________ Cheers, Colin Robson Rover Repair on Youtube DISCOUNTED MTEC BRAKES FOR ALL MG ROVER'S Braided hoses, more coating and pad options for 2024

15th October 2010, 18:37	#3
paddymcn Avid contributor Rover 75 Saloon Join Date: Dec 2006 Location: Co Antrim Posts: 107 Thanks: 0 Thanked 0 Times in 0 Posts	Hi, I would just like to echo those sentiments, congratulations. I don't log on very often and was pleasantly surprised to see the 'regionalisation' of the club. Reading through the site I get a good sense of your enthusiasm and had I known about voting I'm sure you would have got mine. Well done and good luck. I'll try and log in a little more often now I'm off to read up on dodgy drivers door handles...

15th October 2010, 19:48	#5
paddymcn Avid contributor Rover 75 Saloon Join Date: Dec 2006 Location: Co Antrim Posts: 107 Thanks: 0 Thanked 0 Times in 0 Posts	I think its the solenoid pack, 3 doors unlock with the remote but the drivers door needs the key plus on occasion the door will not open from the outside at all. I'm having to go the passenger side to get in, very annoying and its happening more and more often...

15th October 2010, 20:06	#7
paddymcn Avid contributor Rover 75 Saloon Join Date: Dec 2006 Location: Co Antrim Posts: 107 Thanks: 0 Thanked 0 Times in 0 Posts	Thanks Colin, I'll give him a call

4th June 2011, 20:57	#9
The Rover Man Loves to post Rover 75 Classic CDT SE Join Date: Mar 2010 Location: Craigavon Posts: 458 Thanks: 0 Thanked 1 Time in 1 Post	Time for an update on this thread. Colin has been fantastic as our regional rep. He has put in many hours both organising events and interacting with the members. I know from discussions with other club members that he is universally liked and respected. He is someone who deserves his position. I hope the club appreciates the efforts he has gone to to promote and expand it in Ireland. First class job, Colin!

4th June 2011, 21:22	#10
Reebs Owners Club Director Rover 75 Conn SE V6 / MG ZT 260 SE V8 / MG ZT 180 SE V6 Join Date: Feb 2007 Location: Southampton Posts: 20,941 Thanks: 645 Thanked 6,851 Times in 2,537 Posts	Yes we do Well done Colin, your dedication is commendable __________________ Check your trim here . Check your spec here Check your colour here . Check Project Drive here Check your original price here