|
||
|
20th September 2020, 01:39 | #1 |
This is my second home
Rover 75 CDT Connoisseur SE Join Date: Nov 2006
Location: Wales
Posts: 12,227
Thanks: 469
Thanked 523 Times in 241 Posts
|
New lens!
Hi,
A couple of days ago I finally decided to purchase a new lens. I wanted a good quality zoom lens and settled on a Sigma 150-600mm, to use on my Canon 6D mk2. I'd be interested to hear if anyone else has this lens? It's taking a lot of getting used to, owing to the fact that it's so big! I need to get a better tripod I think. Any hint of wind and it wobbles all over the place. In reasonable light though, it's fine hand held. Even at 600mm zoom! Is it actually possible to mount a lens of this length on a tripod with no stability concerns? - I find it hard to imagine.... Here's a selection of photos taken over the last few days... This is a bird (Crow?) sat in a tree next to my house. The bird was sat at the top of the tree easily double the height of my house and was just a small dot by eye.. This is quite heavily cropped, but I'm pleased with the detail: A Crow, I think...? by Philip Davies, on Flickr Next up, the Steel works here in South Wales, taken at sunset... Port Talbot Steel works at sunset... Wales... by Philip Davies, on Flickr Whilst out exploring yesterday, I found this viewpoint, overlooking Carreg Cennan Castle. I took this just before sunset.... Carreg Cennan Castle, Wales... by Philip Davies, on Flickr And today, some wild horses in the Brecon Beacons... Wild ponies in the Brecon Beacons, Wales... by Philip Davies, on Flickr Wild ponies in the Brecon Beacons, Wales... by Philip Davies, on Flickr Wild ponies in the Brecon Beacons, Wales... by Philip Davies, on Flickr
__________________
Last edited by Phil; 20th September 2020 at 01:42.. |
20th September 2020, 02:30 | #2 |
This is my second home
MG ZT CDTi Join Date: Jan 2014
Location: carrick
Posts: 7,859
Thanks: 3,494
Thanked 2,657 Times in 1,973 Posts
|
Good luck with the new lens. The camera looks like it controls the contrast incredibly well too. I do have one criticism though of the lens from the last image (only). It looks like there is a fringe at the edge between the mountain and the sky. I dont know it you use Lightroom, but it will remove that.
Rather than a tripod, I found using a strong monopod, with a decent ball friction head worked best for me with longer lenses The friction from the ball in the head, just holding it, to allow me to move the lens and camera up and down (with the monopod allowing me the rotation). Either way, a decent and sturdy head will be just as important as the tripod (or monopod).
__________________
It is not gloss primer .............. it is duct tape silver! |
20th September 2020, 06:50 | #3 |
This is my second home
Audi Q3 TDI S-Line Quattro Join Date: Jul 2007
Location: Clacton On Sea/On the boat somewhere
Posts: 51,156
Thanks: 9,890
Thanked 12,235 Times in 8,232 Posts
|
Not sure if you are already but make sure you mount the tripod/monopod to the lens and not the camera body when using big telephoto lens
__________________
Jeff. |
20th September 2020, 11:08 | #4 | |
This is my second home
Rover 75 CDT Connoisseur SE Join Date: Nov 2006
Location: Wales
Posts: 12,227
Thanks: 469
Thanked 523 Times in 241 Posts
|
Quote:
Yes, I am using Lightroom. I adjusted the sky to bring it out as it was bleached white. The fringe was initially horrendous but adjusted it to the level you can see now. I'll have another crack at it to see if I can reduce it any further. The tripod I have is a good quality manfrotto. It's fine for keeping the camera still enough to take an imagine at slower speeds, but I couldn't use it for long exposure or very low light. I think I'll need to go back to the camera shop and see if I can look at anything else. Thanks Jeff. Yes, it's mounted to the lens.
__________________
|
|
20th September 2020, 11:20 | #5 | |
This is my second home
MG ZT CDTi Join Date: Jan 2014
Location: carrick
Posts: 7,859
Thanks: 3,494
Thanked 2,657 Times in 1,973 Posts
|
Quote:
A bean bag may be worth having in your kit bag too. Sent from my SM-A600FN using Tapatalk
__________________
It is not gloss primer .............. it is duct tape silver! |
|
20th September 2020, 13:48 | #6 | |
This is my second home
Rover 75 CDT Connoisseur SE Join Date: Nov 2006
Location: Wales
Posts: 12,227
Thanks: 469
Thanked 523 Times in 241 Posts
|
Quote:
One thing I enjoy doing is night photography. For example, the steelworks. At night it looks absolutely incredible. It's lit up like a Christmas tree. I'd love to get some shots of it at night without the need for high ISO... Of course that's not the only photo subject demanding this type of setting.
__________________
|
|
20th September 2020, 18:19 | #7 | |
This is my second home
MG ZT CDTi Join Date: Jan 2014
Location: carrick
Posts: 7,859
Thanks: 3,494
Thanked 2,657 Times in 1,973 Posts
|
Quote:
I would suggest though to experiment with a shorter faster lens, then cropping in the edit. Try this with centre weighted metering (if using manual, take a spot reading from an area between two lights). I get your point though. Ask the camera shop if you can try a ball head on a monopod, particularly one with a friction control. THIS is what I use on my triopd (Giottos) It has a friction control that is very useful to allow a bit of movement whilst reatining a bit of stability. I have an older version of THIS on basic Manfrotto monopod, which is what I would use for moving subjects and airshows etc. The tripod is just too cumbersome and restrictive for airshows (imagine a plane moving horizontally, then suddenly increases altitude or loses it). Without the ball head on a monopod, and the movement of your subject changes vertically, you run the risk of hitting a person standing in from of you as you follow the subject up lol (I still do this even with the head fitted!). For comfort too, try to get a monopod, or tripod at least capable of being as tall as yourself, if you are planning to shoot upwards whilst standing.
__________________
It is not gloss primer .............. it is duct tape silver! Last edited by clf; 20th September 2020 at 18:21.. |
|
20th September 2020, 20:52 | #8 | |
This is my second home
Rover 75 CDT Connoisseur SE Join Date: Nov 2006
Location: Wales
Posts: 12,227
Thanks: 469
Thanked 523 Times in 241 Posts
|
Quote:
I've just tried to apply more defringing in lightroom. It's not making any difference at all. Any other tricks?
__________________
|
|
20th September 2020, 21:40 | #9 | |
This is my second home
MG ZT CDTi Join Date: Jan 2014
Location: carrick
Posts: 7,859
Thanks: 3,494
Thanked 2,657 Times in 1,973 Posts
|
Quote:
It is something I havent had to use in a long time, but there used to be some great actions available to download online. (A basic Google search seems to suggest that they are not widely available any longer - probably little need) If it is not too much, you can enlarged the image, and trace around the edges with the desaturate tool in PS - with a soft edge, working on a new layer so you can adjust the intensity of its effect. If you go too much, it can have the opposite effect creating a halo. When taking a shot that was liable for it, (eg high contrast areas with highly defined edges - trees, subjects against a sky), I would remove any filters I had on the lens, as these could introduce their own - particularly skylight or UV filters - also tele converters too. Experimenting with stopping down the lens can have an effect. Having the lens at the extremes (opened and stopped down) of their apertures can affect the fringing. The lens I had most bother with was a 70-200 Canon kit type lens, which was pre digital (fringing is common on film lenses when used with a digital sensor - emulsion was less sensitive to it). I found using it between f 8 and 16 were its sweet spots for it, and definitely no filter (I gave it to my ex, who used it mainly in auto, and it would be horrendous when used outdoors with a blue sky - to me it was anyway). Be realistic too, particularly if you dont notice it, or it doesnt bother you. I may be too critical as it was one of my bug bears. It was quite obvious in my earlier digital shots, and it used to be discussed frequently in photographic magazines and in particular reviews. Because of this, I see it everywhere, even on TV i can see it quite often (telephoto lenses of camcorders from the mid noughties and TV lenses from the 90's too, were notorious for it, mainly due to their size or lack of developed coatings).
__________________
It is not gloss primer .............. it is duct tape silver! |
|
22nd September 2020, 23:49 | #10 | |
This is my second home
Rover 75 CDT Connoisseur SE Join Date: Nov 2006
Location: Wales
Posts: 12,227
Thanks: 469
Thanked 523 Times in 241 Posts
|
Quote:
Thank you. Yes, I did check the lens profile, I had indeed inputted it. The lens was set wide open, so that may be what I need to keep in mind next time. I do have a UV filter applied, only to protect the lens. I may try removing it, but I hope it wouldn't cause this issue. The filter cost almost made me cry, but worthwhile having to protect the lens. For these images, it doesn't bother me too much. I doubt they will ever be printed, but I'd like to know how to work around it. On another note, the moon was spectacular last night. I couldn't resist taking a shot.. The moon was an interesting colour tonight... by Philip Davies, on Flickr
__________________
|
|
|
|